Is your chip a C0 or D0. my chip (C0) doesn't want to do 3.8Ghz for crap (Linpack stable).Originally Posted by JustusIV
Ok here is my bios i am 3.8 stable but just cant seem to get 4.0 stable
Any ideas are appreciated.
I have tried cranking the vcore up and while that lets me boot, i am not stable. The higest i have got is 1.42 or so and it drops to 1.36 under load.Code:Advanced CPU Features [Press Enter]: CPU Clock Ratio [20x] Intel(R) Turbo Boost Tech [Enabled] CPU Cores Enabled [All] CPU Multi Threading [Enabled] CPU Enhanced Halt (C1E) [Enabled] C3/C6/C7 State Support [Disabled] CPU Thermal Monitor [Enabled] CPU EIST Function [Enabled] Virtualization Technology [Disabled] Bi-Directional PROCHOT [Disabled] Uncore & QPI Features [Press Enter]: QPI Link Speed [x36] Uncore Frequency [x16] Isonchronous Frequency [Enabled] Advanced Clock Control [Press Enter]: standard clock control Base Clock (BCLK) Control [Enabled] BCLK Frequency (MHz) [190] PCI Express Frequency (MHz) [AUTO] C.I.A.2 [Disabled] advanced clock control CPU Clock Drive [ 800mV] PCI Express Clock Drive [ 900mV] CPU Clock Skew [ 100ps] IOH Clock Skew [ 0ps] Performance Enhance [Turbo] Extreme Memory Profile (X.M.P.) [Disabled] System Memory Multiplier (SPD) [x8] DRAM Timing Selectable (sPD) [Manual] Channel A CAS Latency Time [8] tRCD 8 [8] tRP 8 [8] tRAS 20 [24] Channel B CAS Latency Time [8] tRCD 8 [8] tRP 8 [8] tRAS 20 [24] Channel C CAS Latency Time [8] tRCD 8 [8] tRP 8 [8] tRAS 20 [24] Advanced Voltage Control [Press Enter]: Load Line Calibration [Enabled] CPU Vcore 1.15v [1.27500v] QPI/VTT Voltage 1.150v [1.23500v] CPU PLL 1.800v [1.840v] MCH PCIE 1.500v [1.540v] QPI PLL 1.100v [1.8000v] IOH Core 1.100v [1.1600v] ICH I/O 1.500v [AUTO] ICH Core 1.1v [1.100v] DRAM DRAM Voltage 1.500v [1.640v] DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO]
Reply With Quote
Bookmarks