Quote Originally Posted by hokiealumnus View Post
It seems the "without Vdroop" option does slightly different things on different boards (which stands to reason). OC Nub's result above was +.0365 from what he set in BIOS. Mine is +.03575 from what I set in BIOS. The good part is (at least at the two Vcore settings I've tested, when stressing 3.8 & 4.0), it's consistent. So I can deduce loaded Vcore from the BIOS setting merely by adding +.03575 to the BIOS setting. Makes getting precise Vcore when booted up and loaded very easy.

Haven't tested with Vdroop. Wonder if it would have the same consistency?
I just got my rig together yesterday. I've done a little testing so far... the without vdroop setting overvolts from idle when under load and the with vdroop setting shows the more normal vdroop behavior. I can run mine at (default) multi 19x200. I'm having trouble getting the turbo mutli with this cpu/mobo (x20) to function properly. It shows as being enabled in the BIOS (20x200) but CPUZ and Eleet will show the default 19 multi and cpu speed in windows.

I can do 8 threads of prime blend at (19x200) 3.8 but after ~10 min. the temps slowly climb too high and my current cooler can't seem to cope with all the generated heat.