Quote Originally Posted by Earzz View Post
Yes everest shows up pictures after completion/failure but atm it doesnt show weird voltage drops, only when stress testing starts but those voltage lines will remain stable.



Yep you noticed very well, atm its at the lowest setting in the bios, FSB Termination Voltage [1.20].
Untill now it didnt need any more voltage, ill try to run OCCT one more time @ 3655 Mhz because raising my NB voltage last time didnt help and it failed after 2 hours, now i raised the VCore on step.
If this doesnt help i start raising the VTT.
PS: i just saw you are on a 65nm CPU and im on a 45nm, that could explain that you need more VTT
I didn't mean a log for the voltages. Is there a way to know where it failed like in Prime95 Large or Small FFT's?

Try with FSB Termination Voltage at 1.14V or 1.16V. Try to get it LinX or IBT stable for at least 25 passes before you try it again with OCCT or Prime95.