How Many Cores?!?!?!

[EnJoY]

Any programs out there that adjust memory timings?

I really wish codered still developed A64tweaker. Remember how vital that used to be for BH5 tweaking back in the day? I don't think anything aside from AOD allows you access and adjust to all the memory timings. And especially not for the board you're on.

[chew*]

Try installing Amd Over Drive S7, no clue if it will work though, it might not detect AMD cpu if anything can fool with ram in the fly its that......might be able to raise HT bus, etc bump NB and HTT

BTW if this is sleeping I want to see you Work.

[shadow_419]

snip.
BTW if this is sleeping I want to see you Work.

lol! For real! S7 is pumping out benchies with one eye open it seems.

[s7e9h3n]

Try installing Amd Over Drive S7, no clue if it will work though, it might not detect AMD cpu if anything can fool with ram in the fly its that......might be able to raise HT bus, etc bump NB and HTT

BTW if this is sleeping I want to see you Work.

Well, that was a complete failure...lol:

[justapost]

Any programs out there that adjust memory timings?

As always baredit/crystalcpu and the bkdg.

[ubuntu83]

BTW if this is sleeping I want to see you Work.

I think he is as excited about it as we are and missed it a lot when he was away.

[Daveburt714]

Any programs out there that adjust memory timings?

Hey s7, this memory tweaker worked quite well on Phenom I's...
Might be worth as shot...

http://www.xtremesystems.org/forums/...ad.php?t=92190

[Lightman]

I was going to say AOD for tweaking memory, but you already find out it's not working. Still it would be worthy giving a shot with AOD 2.1.4. That was the version which worked without knowing the CPU and while newer releases were crashing on my PC this one was happy bunny! The only drawback was lack of info in some tabs ...

EDIT: Also AOD feels best on XP or Vista OS ...

[Don_Dan]

Any programs out there that adjust memory timings?

Have you tested CPU-Tweaker by FELIX?

[justapost]

That setup has four memory controller, all those apps only support one controller.
Chapter 3.5 here shows the pci register specs.
http://support.amd.com/de/Processor_TechDocs/31116.pdf
In BarEdit their should be four pci devices for the different memory controllers. I tested it on an agena single socket system last year and it worked.

[s7e9h3n]

It's cooler today



I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

[FlanK3r]

whau, nice

[EnJoY]

It's cooler today

I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

How many threads can 06 and Vantage utilize?

[[XC] gomeler]

How many threads can 06 and Vantage utilize?

3DMark Vantage only utilizes 8 threads for the CPU tests, I believe 3DMark 2006 also only utilizes 8 threads. So unfortunately I don't think this setup will produce monster scores like it is doing with wPrime. If those CPUs scaled like Deneb under LN2 a single chip would make for very interesting results.

[FlanK3r]

gomeler:--> it is not so good for Gulftown ,-] with 12 threads. Omg, i want see Thuban with LHe ...more 1/2 year waiting...

[Tomasis]

me too.

AM3 compability is sweet

one is running Sempron and can suddenly upgrade to Thuban

[demonkevy666]

3DMark Vantage only utilizes 8 threads for the CPU tests, I believe 3DMark 2006 also only utilizes 8 threads. So unfortunately I don't think this setup will produce monster scores like it is doing with wPrime. If those CPUs scaled like Deneb under LN2 a single chip would make for very interesting results.

futuremark
can't keep up with cpu future though lol

[klajd]

its good to see cpu score on 3dmark 06 or vantage .. vantage for sure is 16 thread cpu test ..

[blindbox]

It's cooler today



I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

http://www.hwbot.org/hallOfFame.do?t...plicationId=15

hwbot says you're third

Are the multi's unlocked on the processors?

AFAIK, you can somehow 'disable' CnQ by setting all the P states to the same voltage and multi.

[ajaidev]

OMG did u people see this???

http://forums.ocworkbench.com/showthread.php?t=89809

[demonkevy666]

OMG did u people see this???

http://forums.ocworkbench.com/showthread.php?t=89809

My dreams are true then L1 128 Kbytes

38-40MB Of cache O_o

42 secs on 1024m wprime it's 38% faster then mangus with only 25% more cores. at nearly the same clock speed, (3% lower clock speed actually.)

[Smartidiot89]

3DMark Vantage only utilizes 8 threads for the CPU tests, I believe 3DMark 2006 also only utilizes 8 threads. So unfortunately I don't think this setup will produce monster scores like it is doing with wPrime. If those CPUs scaled like Deneb under LN2 a single chip would make for very interesting results.

Don't meen to go off-topic, but didn't Intels new Gulftown score about 50% above the previous record in CPU Score?

[Lightman]

It seems too early for any Bulldozer leaks..

[FlanK3r]

OMG did u people see this???

http://forums.ocworkbench.com/showthread.php?t=89809

WTF???What is it? Orochi sample?
edit:yes, Orochi ! Whau!!! AVX, 32nm, 2011 omg, hell CPU!

[demonkevy666]

It seems too early for any Bulldozer leaks..

really...? (why) with Istanbul out ahead of time and mangus would ahead because that too.

so next step is bulldozer, I don't think it's too early. it's not going to be shelfs this year but maybe by mid nest year it gets there early from getting heavy testing make sure there aren't any bugs.
unlike that Barcelona which go pushed out without the heavy tested needed where the tlb bug was over hyped anyways.