Live MB OC Report :: ASUS Rampage Extreme

[zsamz_]

ghost i wont be ownin a set of ripjaws i dont think they are good enough compared to my patriot 2000 and 1800 sets
maybe the 1 good stick is not real good lol
i'm gonna wait till hyper prices settle
i got board to work with 8 gigs with acceptable bandwith

[DerekT]

i got board to work with 8 gigs with acceptable bandwith

Nice Chip there!

That's where I wanted to be. Prior to this memory I was stuck with unacceptable speed. Different modules and models brought me to the view that the issue was the memory controller. Finally the board died on me, (loss of a NB temp diode and halting the system) and I advance RMA'd it to get a new one very quickly. The new board was far better with memory, but still I could not reach high speeds and low latencies with 8GB.

So I am happy as well.

[zsamz_]

Nice Chip there!

That's where I wanted to be. Prior to this memory I was stuck with unacceptable speed. Different modules and models brought me to the view that the issue was the memory controller. Finally the board died on me, (loss of a NB temp diode and halting the system) and I advance RMA'd it to get a new one very quickly. The new board was far better with memory, but still I could not reach high speeds and low latencies with 8GB.

So I am happy as well.

thanks btw thats econo mode
still waitin on rma of ripjaws
how high did u get with 2 stix?

[DerekT]

thanks btw thats econo mode
still waitin on rma of ripjaws
how high did u get with 2 stix?

Never actually played with two. I wanted 8GB and I'm fine with 1830 @ 8GB with 475FSB or 1648 @ 8GB with 515FSB. It's pretty much assured 2000Mhz with 4GB though if I can make 1830 @ 9-8-8-20 2T (No 8CL even with 1648) with 8GB on this board.

[Zeus]

It feels great to be back on the Rampage Extreme again.

Did some testing and again 600FSB was a breeze...



The CSX Diablo's i got seem to need exceptional high voltage, 2.15V for DDR1800 7-6-5-18.

Maybe i have to get me some Corsair dominator GT's.

Btw, im running 4.5GHz at 1.32Vcore now, still have to test stability though.

[kintaro]

It feels great to be back on the Rampage Extreme again.

Did some testing and again 600FSB was a breeze...



The CSX Diablo's i got seem to need exceptional high voltage, 2.15V for DDR1800 7-6-5-18.

Maybe i have to get me some Corsair dominator GT's.

Btw, im running 4.5GHz at 1.32Vcore now, still have to test stability though.

Zeus try to find a kit of Cellchok like the one on the pic and you are going to see some nice boost.

[Zeus]

I'm kinda interested in them tweaker shortcuts on ya desktop Diablos here do 2000mhz C8 at 2volts, I'm on 1204 bios... never even tried 600FSB on my board my Phase can't handle the cpu at 10X above 560FSB...

It's just Monteboy's SuperPi tweaker for doing copy waza, if you're interested, send me pm mate.

Zeus try to find a kit of Cellchok like the one on the pic and you are going to see some nice boost.

That's a nice kit you got there, how much volts for that?

Been searching for a kit of Cellshocks but to no avail.

Now i ordered 2x1GB Ballistix 1800 8-8-8, let's hope it has some nice GTS chips on them.

I don't know what's up with the Diablo's, 1600 7-6-5 runs with just 1.85V but 1800 7-6-5 requires 2.15V!