** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Machinus]

I need help...I am not sure what I am doing wrong but the chip is a little warm and the FSB just won't budge. Can anyone improve my settings?

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8.0 ]
Fine CPU Clock Ratio............................[ +0.5 ]
CPU Frequency...................................[ 4037.5 ]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 475 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 900mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 50ps ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
Extreme Memory Profile (X.M.P)..................[ Auto ]
(G) MCH Frequency Latch.........................[ 333Mhz ]
System Memory Multipler.........................[ 2.40B ]
Memory Frequency 1066...........................[ 1140 ]
DRAM Timing Selectable..........................[ Manual ]
 
CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.300 ].....................[ 1.40625 ]
CPU Termination   [ 1.200 ].....................[ 1.380 ]
CPU PLL           [ 1.500 ].....................[ 1.570 ]
CPU Reference     [ 0.760 ].....................[ 0.914 ] 
 
MCH Core          [ 1.100 ].....................[ 1.300 ] 
MCH Reference     [ 0.760 ].....................[ 0.954 ]
MCH/DRAM Refernce [ 0.900 ].....................[ 1.130 ]
ICH I/O           [ 1.500 ].....................[ 1.500 ]
ICH Core          [ 1.100 ].....................[ 1.100 ] 
 
DRAM Voltage      [ 1.800 ].....................[ 1.940 ] 
DRAM Termination  [ 0.900 ].....................[ 0.970 ]
Channel A Ref     [ 0.900 ].....................[ Auto ]
Channel B Ref     [ 0.900 ].....................[ Auto ]