Quote Originally Posted by railmeat View Post
i do have 4 questions.


1.can i increase my core without touching my shaders at all, to test core limit? <---most important to me!!!

2.doing this volt mod increases core,shader and memclocks at the same time or what?

3.after the mod u can use evga percesion but like on nitrous oxide,higher limits across the board ehh?

4.after the mod is it possible to use evga voltage tuner after u unlocked the volt limit higher?
1. You can do it if you set your core clock linked with shaders, then uncheck the 'Link clocks' and set your shaders lower.

2. With this vmod you can increase core and shader clocks, mem clocks will decrease when setting your maximum core/shaders.

3. and 4. don't know

Finally did the mods and tested.
0,0,0,1,1,0,1,0 = ~1.084 V 720 MHz core, shaders linked
0,0,0,0,1,0,1,0 = ~1.102 V 740 MHz core, shaders linked
0,0,0,0,0,0,1,0 = ~1.308 V 792 MHz core, shaders unlinked@1756 MHz

Mems running @1248 MHz. If dropping memory to 1188 MHz I can push core one step higher but only if the core tems are pretty low.
Giant step compared to stock vgpu, tnx for your work SF3D