Quote Originally Posted by Machinus View Post
I am seriously stuck at 4.038 I have tried vcore up to 1.44, dropping the divider down to 1:1 and multiplier to 7 with no stability : (

Code:
Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8.0 ]
Fine CPU Clock Ratio............................[ +0.5 ]
CPU Frequency............................[ 475x8.5 ]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 475 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 1000mv ]
PCI Express Clock Drive.........................[ 1000mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 50ps ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
Extreme Memory Profile (X.M.P)..................[ Auto ]
(G) MCH Frequency Latch.........................[ Auto ]
System Memory Multipler.........................[ 2.40B ]
Memory Frequency 1066...........................[ 1140 ]
DRAM Timing Selectable..........................[ Manual ]
 
CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore         [ 1.1875  ]...................[ 1.4250  ]
CPU Termination   [ 1.20    ]...................[ 1.380 ]
CPU PLL           [ 1.50    ]...................[ 1.590 ]
CPU Reference     [ 0.760   ]...................[ 0.914 ] 
 
MCH Core          [ 1.100   ]...................[ 1.300 ] 
MCH Reference     [ 0.760   ]...................[ 0.954 ]
MCH/DRAM Refernce [ 0.900   ]...................[ 1.200 ]
ICH I/O           [ 1.500   ]...................[ 1.500 ]
ICH Core          [ 1.100   ]...................[ 1.100 ] 
 
DRAM Voltage      [ 1.800   ]...................[ 1.960 ] 
DRAM Termination  [ 0.900   ]...................[ 0.980 ]
Channel A Ref     [ 0.900   ]...................[ Auto ]
Channel B Ref     [ 0.900   ]...................[ Auto ]
Machinus how are you mate, from what i see you have my same vid of chip wich is great CPU Vcore [ 1.1875 ].

try to drop vtt to 1,20 and see that CPU ref is .785 and MCH .80, then up it and this values will change auto, for lots of us this worked perfect so for me tom and zucker2k...

start on a normal OC, like 445x9 ti try your CPU and MEM on 1:1 CL5 all auto, PL9 and trfc 68 (you have 2x2GB ???? wich RAM), try to find FIRST as stable point where you can start upping, dont start messing around with values and changing all at time and multis etc...go step by step or you will go crazy.

Use 800/800/0/50 or 900/900/0/50, i use 1000/1000/0/0 to 4800+ to bench the rest are for my 24/7

i will send you a template of my 445x9 and 500x8 so you have a start point, should work for ya as owr quads are close.

Cheers
Sergio