Last edited by chuckbam; 08-17-2009 at 11:25 PM.
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
P6TD Deluxe is 16+3 phase design while P6T Deluxe V2 is 16+2 I believe.
Also ASUS Fanless Design: Stack Cool 3+ (more copper) afaik.
Last edited by zalbard; 08-17-2009 at 11:44 PM.
Nope it has 16+2 Phase Power Design
Stack Cool 3+, Two copper plates (like I said)
http://usa.asus.com/products.aspx?l1...76&modelmenu=2
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
I don't understand why they bother with such minor a difference unless this is intended to supersede the P6T Deluxe V2.
If you don't like what I have to say, please feel free to ignore it. I do!
Core i7 920 (D0) @ 4.0Ghz, P6T Deluxe V2 (0901), 12GB Corsair CM3X2G1600C7 @ 1600 7.7.7.20 2T, ATCS 840, Antec TPQ 850, Radeon 4850, TMS-200 + TMS-EB200, EK Supreme HF, EK-D5 dual top, 2x MCP-655-B, MCR-420, 7X Skythe D1225C12B5AP-15, Durelene tubing. Obviously not a gamer as you can tell by the low end video card.
What they should have done is add another RAID controller where the SAS was and include some eSATA adapters. And change 1394a ports to 1394b
2 copper plates
I bet it will supersede the P6T Deluxe V2.
The V2 is for Version 2 less SATA ports.
--------
Intel Matrix Storage Console - 8.9.0.1023
Intel Chipset inf - 9.1.1.1015
Yukon Ethernet - 10.70.6.3 - 8/14/09
Last edited by chuckbam; 08-18-2009 at 04:09 AM.
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
no newer p6t deluxe v2 bios as 0504
if you have some newer bios pn me
thx
Only the 0007 and the 0006. illuminatiASUS said new bios' are in the works for the P6T series, but did not give a time frame. I myself do not expect any. I am moving on to other brands of motherboards.
I plan to keep this board for a good while. But, this will probably be my last ASUS for my #1 system. The chassis fan headers stopped powering. They sent me an advanced replacement that would not boot to 12GBs. I sent it back and purchased 4-pin connectors and some controllers. I hope nothing else goes. The CPU and Power Fan headers work fine.
I used to only buy GIGABYTE. look at this baby! But, I think it only has 2oz of copper
![]()
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
Does anyone know if the P6TD Deluxe has the new b3 x58 chip?
ASUS Rampage IV Extreme / i7 3930k / G.Skill 4x2GB 2133 / Asus HD7970 / Corsair AX1200
ASUS Maximus V Extreme / i7 3770k / G.Skill 4x4GB 2133 / EVGA GTX Titan SC SLI / Enermax Platimax 1350
What's the difference about this B3 rev?
Have someone notice when you plug a more power video card, the overclock become more hard to get estable overclock at the same settings when using a basic video card?
Here i can get nice and stable 4200@1.224 with 8400GS, but when i put my GX2 for example, for the same clock speed i have to push a litte more voltages on de cpu (1.248) and the board... is that normal?![]()
angelreaper is only at 3150 MHz so far. He's just getting warmed up.
Welcome to Asus angelreaper.
He won't be able to tell if there are any turbo throttling issues until he gets up to 4000 MHz and beyond.
Those core temperatures are pretty bad. I'd recommend water cooling...
If you don't like what I have to say, please feel free to ignore it. I do!
Core i7 920 (D0) @ 4.0Ghz, P6T Deluxe V2 (0901), 12GB Corsair CM3X2G1600C7 @ 1600 7.7.7.20 2T, ATCS 840, Antec TPQ 850, Radeon 4850, TMS-200 + TMS-EB200, EK Supreme HF, EK-D5 dual top, 2x MCP-655-B, MCR-420, 7X Skythe D1225C12B5AP-15, Durelene tubing. Obviously not a gamer as you can tell by the low end video card.
oh..i see..
it appear i have been mistaken by thinking that this particular throttling problem is triggered by high cpu temp.
i also been thinking (w/ extreme prejudice) :
If (later) P6TD bios is proven to have "turbo trhottling" bug fixed, meanwhile the "old" P6T DLX/V2 will never get this "bug" fixed (the 0006/0007 is forbidden right?). I think asus is trying to setup a massive "exodus" from P6T DLX/v2 to P6TD DLX...bad,bad asus. i just hope my "prejudice" will only be "prejudice" not the "reality"
![]()
Lots of users have successfully cross flashed their P6T Deluxe v2 board with the special v1 0006 bios without any problems.
Asus just released another special bios yesterday for the P6T6 WS (0001) and JJ asked me what board should be next. I told him to flip a coin.
Lots of v2 owners but the serious users are already using 0006 so I thought a special bios for P6T7 WS might be more important. Go back a page or two in this thread and find JJ and tell him what you think. Place your vote for a special v2 bios if you think that's important.
Turbo throttling is caused by all 3; high core temperatures, high current and high power consumption. Minimize all 3 of those and the higher you will be able to overclock without hitting the throttling wall.
Much easier to just cross flash to bios 0006 and solve all your problems with one quick fix.
Last edited by unclewebb; 08-23-2009 at 08:54 AM.
may i ask you, i have 1 (noobies) question:
what is the difference between 0007 and 0006 bios if i using P6T DLX OC PALM w/ i7 920 D0?
all i know is the 0006 bios fixed some issues w/ c0/c1 steeping. Is there any detail i might have overlooked?
so it's possible!!!![]()
that make me to draw a conclusion that P6TD just P6T DLX V2 with more ounce of cooper and new chipset (SLGMX / X58 B3) (CMIIW).
and...that gave me more than enough reason to cancelmy "exodus" plan
from P6T DLX V1 (oc palm) to P6TD.
( admittedly some of asus marketing mumbo-jumbo has nail me)
Last edited by E-CRUSH; 08-21-2009 at 08:39 AM. Reason: typo fixing & some other thing.. nothing essencial
My results with the Ci7 920 @ 4200mhz are now stable at 1.208v
I will try to get more oc from the processor now
![]()
To date, my system has been ROCK SOLID at 4.40Ghz 24/7 ever since I crossflashed to the 0006 BIOS on my V2 board when that BIOS was made available. I have not run into any issue whatsoever......there isn't anything new to report that's why I haven't post much lately. LOL![]()
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
I assume that is your daily setting...nonetheless,still it is an excellent result you have there..
Just out of curiosity, the 0106 (P6TD) bios fixed the turbo throttling by "cheating" ( slashing TDP reading ) or by *ehmm..* "superior design", like asus'es claim on ROG series mobos.
Last edited by E-CRUSH; 08-24-2009 at 12:13 AM.
I just got me new P6T Deluxe V2 but i need some help with a problem.
Im missing the QPI link settings and the uncore setting in the AI Tweaker menu
Im using the latest 0504 bios but i cant finde the two settings they are just gone![]()
Bookmarks