I am having some trouble getting my i7 to run anything past 4.410ghz on this board when I want to benchmark it. Now it only takes 1.440V Vcore (CPU-z) and 1.45V Vtt (bios) for me to take it to 4.4. I run my RAM at 840mhz @ 7-7-7-16 1T timings 1.70V (bios) Now this runs 3d mark fine and wPrime 32 and 1024M just fine. But when I go anything higher than a 210 base clock I get lock ups and BSOD's like no tomorrow. Now I am upping the voltage as I up the base clock. I am going for 4.5Ghz at least. I have tried 1.55V Vcore (bios) and 1.55v Vtt (bios) and it will still BSOD on me when running vantage at the 215 base clock. I have tried loosening the ram timings to 8-8-8-24 1T and up their voltage to 1.72V and it is no go. I have CPU PLL at 1.880V at all times. Now I am always trying to run my Uncore at x18 and my RAM at x8, so my Uncore is running a 2:9 ratio. I have tried lowering Uncore to x16 and it was no go. Now should I be playing around with another voltage settings, or just think my chip is at it's max? I am hoping I can squeeze out a little more for some benchmarks.