Foxconn BloodRage Shared BIOS Settings

[Seanie's Show]

CPU & Batch: Core i7 920 3910A369
RAM Model: Patriot Viper Extreme 1600mhz 8-8-8-24-1T
Bios Ver: Quantum BIOS P06
CPU Features
PPM ...............................: Enabled
EIST ..............................: Enabled
CxE................................: Disabled
Execute Disable Bit ...............: Disabled
Virtualization.....................: Disabled
Hyper Threading ...................: Enabled
Active Processor Cores ............: All
Memory Settings
Memory Controller Settings
IMC Configuration .................: Enabled
Channel Congifuration .............: Independant
Channel Interleaving ..............: 6 Way
Rank Interleaving .................: 4 Way
Memory Timings
Extreme Memory Profile XMP ........: Disabled
Memory Profile Select .............: Auto
DRAM Timing Control ...............: Manual
tCL (CAS Latency) .................: 8T
tRCG (RAS to CAS Delay) ...........: 8T
tRP (RAS Precharge) ...............:8T
tRAS (Precharge Delay) ............: 24T
CR (Command Rate) .................: 1T
tRFC (Refresh Cycle Time) .........: 59
tWR (Write Recovery Time) .........: Auto
tWTR (Write to Read Delay) ........: Auto
tRRD (RAS to RAS Delay) ...........: Auto
tRTP (Read to Precharge) ..........: Auto
All Voltage Settings
CPU Voltages
CPU Core Voltage ..................: +70mv
CPU Target Core Voltage ...........: 1.28250
CPU Vdroop Compensation ...........: Disabled = On (Enabled = Off)
CPU VTT (UnCore) Voltage ..........: +60mv
1.8 PPL Voltage Setting ...........: 1.800v
CPU Clock Amplitude Ctrl ..........: 0.800v
Memory Voltages
DRAM Voltage ......................: 1.63v results in 1.65v
DIMM1 Vref CA (Addresses) .........: 0.500 Default
DIMM1 Vref DQ (Data) ..............: 0.500 Default
DIMM2 Vref CA (Addresses) .........: 0.500 Default
DIMM2 Vref DQ (Data) ..............: 0.500 Default
DIMM3 Vref CA (Addresses) .........: 0.500 Default
DIMM3 Vref DQ (Data) ..............: 0.500 Default
Chipset Voltages
X58 IOH Core Voltage .............: 1.26v
X58 IOH VCCA 1.1V ................: 1.108v
X58 IOH VCCA 1.5V ................: 1.506v
ICH10 SB Voltage .................: 1.518v (Slight Increase Gave Stability)
OC Gear : Skipping this part
CPU Turbo .........................: Always On
System Turbo ......................: Enabled
Clock Speed Control Center
CPU Bclock (FSB) ................: 200
QPI Link Fast Mode ..............: Enabled
QPI Multiplier ..................: x18
QPI Target Speed ................: 3605mhz 7.2gt/s
CPU Core Multiplier .............: x20
CPU Core Target Speed ...........: 4006 (EIST Enabled 21x200=4208mhz)
CPU Uncore Multiplier ...........: x16
CPU Uncore Target Speed .........: 3208mhz
Memory Bus Multiplier ...........: x8
Memory Bus Target Speed .........: 1604mhz
CPU Clock Skew ..................: 0ps
IOH Clock Skew ..................: 0ps

Link to overclocking prime results: http://i817.photobucket.com/albums/z...2/Untitled.jpg

Cant upload any files and I cant figure out the URL thing.