Foxconn BloodRage Shared BIOS Settings

[Death_Dealer83]

CPU & Batch (3849A866)
RAM Model (Mushkin 998708 2000mhz)
Bios Ver: Quantum BIOS P06 and G25

CPU Features
PPM : Enabled
EIST : Enabled
CxE : Disabled
Execute Disable Bit : Disabled
Virtualization : Disabled
Hyper Threading : Diabled
Active Processor Cores : ALL
Memory Settings
Memory Controller Settings
IMC Configuration :Enabled
Channel Congifuration :Independent
Channel Interleaving :6
Rank Interleaving :4
Memory Timings
Extreme Memory Profile XMP : Disabled
Memory Profile Select :auto
DRAM Timing Control :Manual
tCL (CAS Latency) :6
tRCG (RAS to CAS Delay) :6
tRP (RAS Precharge) :5
tRAS (Precharge Delay) :auto
CR (Command Rate) :1T
tRFC (Refresh Cycle Time) :auto
tWR (Write Recovery Time) : auto
tWTR (Write to Read Delay) : auto
tRRD (RAS to RAS Delay) : auto
tRTP (Read to Precharge) : auto
All Voltage Settings
CPU Voltages
CPU Core Voltage :+30mV
CPU Target Core Voltage :1.26750
CPU Vdroop Compensation :Enabled
CPU VTT (UnCore) Voltage :+80
1.8 PPL Voltage Setting :1.800
CPU Clock Amplitude Ctrl :.800
Memory Voltages
DRAM Voltage :1..65
DIMM1 Vref CA (Addresses) :.500
DIMM1 Vref DQ (Data) :.500
DIMM2 Vref CA (Addresses) :.500
DIMM2 Vref DQ (Data) :.500
DIMM3 Vref CA (Addresses) :.500
DIMM3 Vref DQ (Data) :.500
Chipset Voltages
X58 IOH Core Voltage :1.10
X58 IOH VCCA 1.1V :1.108
X58 IOH VCCA 1.5V :1.506
ICH10 SB Voltage :1.506
OC Gear : Skipping this part
CPU Turbo : Always On
System Turbo : Enabled
Clock Speed Control Center
CPU Bclock (FSB) : 200
QPI Link Fast Mode :
QPI Multiplier : x18
QPI Target Speed : 3605(7.2GT/s)
CPU Core Multiplier : x18
CPU Core Target Speed :3605
CPU Uncore Multiplier : 18
CPU Uncore Target Speed : 3609
Memory Bus Multiplier : 8
Memory Bus Target Speed : 1604
CPU Clock Skew : Ops
IOH Clock Skew :Ops