-
Trying to get stability at 3.8 Ghz q9450.
He folks,
If anybody has any suggestions ... please let me know.
I've got my system up and running at 3.8 ghz, i can throw about any benchmark / stresstest at it and it keeps running (though it starts throtteling after about 2 minutes in intel burnin test, but only just)
cooling is a scythe ninja copper with std fan, tried a 3000 rpm static pressure 133 cfm fan on it, still it starts throtteling at around the same time as with the standard fan.
Vcore = 1.30V
vNB = 1.6 (was running at 1.56 but it keeps freezing after some time, normally notice it when i come home from work.)
mem = 8-8-8-28-82 (it's OCZ 1600 1G modules ... all 4 bank occupied) running at 1266 mhz at 1,9V
pll = 1.52V
p5q3 bios 2105
Have not played with GTL's yet ... tried once, but every setting resulted in a non-boot scenario ...
i've run actually better then this everyday freezing at 3.8 Ghz but then with 1.28 vcore ... thought i'd bump it up a notch looking at numbers from different users ... still, it didn't help me ... comp is still freezing every day ... the night it normally survives ... it's running seti + cuda after 60 minutes of idle time, seti at 75% because it then only reaches about 80C and i actually don't care about that that much ... realtemp's numbers i don't trust that much.
Any help would be appreciated ...
Last edited by Intrud3r; 07-27-2009 at 10:34 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks