** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[KRich]

Oh yea, you need a bigger rad. That 220 is hard pressed to cool that cpu and graphics card effectively.

Cheers

Any idea whether one of those stackable 220s would do the same as there is no room for a 3 x 120 at all as I don't want the rad outside the system and inside, even in my CM Stacker, there isn't any space to have a 3 x 120 internally.

I guess I could add another 2 x 120 rad so I could have two in one loop - How would that be for temps?

Cheers

[Hoss331]

Cheers

Any idea whether one of those stackable 220s would do the same as there is no room for a 3 x 120 at all as I don't want the rad outside the system and inside, even in my CM Stacker, there isn't any space to have a 3 x 120 internally.

I guess I could add another 2 x 120 rad so I could have two in one loop - How would that be for temps?

Cheers

The stacker add-on will help but not as good as two separate rads or one large rad. If you have room for 2 separate rads id go that route, also might want to into getting some better fans.

[KRich]

The stacker add-on will help but not as good as two separate rads or one large rad. If you have room for 2 separate rads id go that route, also might want to into getting some better fans.

I think I will add another 120.2 to the loop as it will be easier to do in my CM Stacker STC-T01 than a single 120.3. I've got the current 120.2 on the floor of the case which is getting fresh air from the through the mesh at the bottom and then I can add another 120.2 at the front which can get fresh air through the mesh there.

I think the 1 x MCW-655 will be good enough for both rads as I don't think I have room for two separate loops.

Cheers buddy