XS INTEL CORE i7 STABLE OVERCLOCKING DATABASE

[hlonipha]

CPU:Xeon W3520
USERNAME:Hlonipha
CPU MHZ: 4.419 Ghz
HT: ON
CPU BATCH: 3850A823
CPU S-SPECK: SLBEW
QPI/VTT 1.45
CPU VOLTS: 1.42
CPU COOLING: Custom Water
BRAND AND MODEL OF COOLER: HK v 3.0 TFC X360
MOBO BRAND AND MODEL: EVGA Classified
BIOS VERSION: S610
OS: Win 7
RAM BRAND: Corsair
RAM MODEL: Dominator GT
RAM MHZ: 1866
RAM TIMMINGS: 7-8-7-20

[xpatar]

@ billdavis. At the table of the first page my HT is off and bios version is 0504.
Thank you.

[Sniper]

CPU:Xeon W3520
USERNAME:Sniper
CPU MHZ: 4.326 Ghz
HT: ON
CPU BATCH: 3848A352
CPU S-SPECK: SLBEW
QPI/VTT 1.28
CPU VOLTS: 1.28 (1.3125 bios)
CPU COOLING: Air
BRAND AND MODEL OF COOLER: TRUE with single Pabst 38db (2000rpm)
MOBO BRAND AND MODEL: GB UD5
BIOS VERSION: F8c
OS: Win 7
RAM BRAND: OCZ
RAM MODEL: 1066 Platinum CL7
RAM MHZ: 1648
RAM TIMMINGS: 8-8-8-24

Open air testing with 23 degrees ambient. Prime blend/custom 5200 mem.

[bluehaze]

USERNAME: Justin.kerr
CPU MHZ: 4.599ghz
HT: ON
CPU BATCH: 3845B027
CPU S-SPEC: SLBEJ
QPI/VTT 1.4
CPU VOLTS: 1.425 in bios
CPU COOLING: WATER
BRAND AND MODEL OF COOLER:Heat killer, ddc3.2 + Xspc restop, Feser 360, Swiftech Mcr320, Xspc rx360,
MOBO BRAND AND MODEL: Evga Classified B3
BIOS VERSION: S610
OS: Vista 64
RAM BRAND: MUSHKIN
RAM MODEL: REDLINE Ascents
RAM MHZ: 1752
RAM TIMMINGS: 7-7-6-20

How in the Heck do you have 70c temps with 4.59ghz HT on? That is insanely good if not impossible without some sort of chiller or something Really curious what type of setup your running!

[justin.kerr]

3 Triple rads with heat killer block on cpu loop, one triple rad for mb block. lol

[glide 1]

Here's mine:

CPU : i7 920
USERNAME : glide 1
CPU MHZ : 4.5ghz HT ON
CPU BATCH : 3846B109
CPU S-SPECK : SLBEJ
CPU VOLTS : 1.384v
CPU COOLING : Water
BRAND AND MODEL OF COOLER : D-tek Fusion, Swiftech 355, swiftech dual +single (GPU 4870 in same loop), xspc restop
MOBO BRAND AND MODEL : Asus P6t Deluxe
BIOS VERSION : 1504
OS : Windows7
RAM BRAND : OCZ
RAM MODEL : Gold
RAM MHZ : 1600
RAM TIMINGS : 8-8-8-18

Only an hour so far. throttling on this board has been fixed through a beta bios. So will try to run prime longer next time.



Ben805- been looking at your screenshots and i think i have a similar chip to yours (yours slightly better though), i'm hoping to run this 4.4ghz prime and linX stable eventually. Oh and thanks for testing the 0007 bios for the deluxe ver1 by the way.

[bluehaze]

3 Triple rads with heat killer block on cpu loop, one triple rad for mb block. lol

LOL That's sick. What are your ambients? You have me thinking about picking up a mora 2 now Got any pics of the setup?

[justin.kerr]

LOL That's sick. What are your ambients? You have me thinking about picking up a mora 2 now Got any pics of the setup?

The setup changes every week seems like. lol so no current pics, but as soom as I get some wire management, ssd's remounted, ect I will post some pics.
Room is fairly cool 70F-72F

[ben805]

Ben805- been looking at your screenshots and i think i have a similar chip to yours (yours slightly better though), i'm hoping to run this 4.4ghz prime and linX stable eventually. Oh and thanks for testing the 0007 bios for the deluxe ver1 by the way.

you welcome.

by the way you have the 3846B109 stepping and mine is 3849A846, I heard the B batch clock better, at 4.20Ghz mine required 1.32v so I think you got a better one.

The setup changes every week seems like. lol so no current pics, but as soom as I get some wire management, ssd's remounted, ect I will post some pics.
Room is fairly cool 70F-72F

4 triple rads total....DUDE!! that's excellent load temp you got there at 4.6Ghz with HT on, I think you just set the record being prime stable for that long at those speed, dang...I need to pick up a couple monsta or something. LOL

[billdavis]

go this setup last week, new cooling i got yesterday, i'll have atleast 4-5 hours of prime when i get home from work, if i HAVE to have more, i'll do it over night. max temps so far is 73c on the first core, others are at 70/71/69, cant seem to get 4ghz to boot further than running memtest, which it will run for hours, but as soon as it sees the OS loading screen it freezes and reboots. i havent tried any multipliers past 20 as the bios says between 12-20.
also, does anyone mess with the ioh voltage? im trying not to mess with things that will destroy my system, but i would LOOOOVE to see 4ghz, even if it's just for a day or 2 before i get back to 3.8

CPU: i7 920
USERNAME: trance565
CPU MHZ: 3.8ghz
HT: off
sSpec: SLBCH
revision/stepping: c0/c1 4
CPU BATCH: 3841a702
CPU VOLTS: 1.375(cpu z shows 1.344)
CPU COOLING: AIR
BRAND AND MODEL OF COOLER: ultra 120 extreme 1366 - thermalright(stock push setting... for now)
MOBO BRAND AND MODEL: gigabyte ud4p
OS: xp64
RAM BRAND: corsair
RAM MODEL: xms3
RAM MHZ: 1600
RAM TIMMINGS: 7-7-7-18-1t
RAM VOLTAGE: 1.76v
qpi/vtt voltage: 1.34

how do we know your stable?

[billdavis]

@ billdavis. At the table of the first page my HT is off and bios version is 0504.
Thank you.

fixed

[dorkiedoode]

updated;

CPU: i7 920
USERNAME: dorkiedoode
CPU MHZ: 4011
HT: ON
CPU BATCH: 3849A832
CPU S-SPECK: SLBEJ
QPI/VTT 1.2
CPU VOLTS: 1.20
CPU COOLING: AIR
BRAND AND MODEL OF COOLER: SUNBEAM CORE CONTACT FREEZER
MOBO BRAND AND MODEL: GIGABYTE UD4P
BIOS VERSION: F7
OS: 7 64-bit
RAM BRAND: OCZ
RAM MODEL: Platinum
RAM MHZ: 1528
RAM TIMMINGS:7-7-7-24

[angelreaper]

CPU:Xeon W3520
USERNAME:angelreaper
CPU MHZ: 4.011 Ghz
HT: ON
CPU BATCH: 3845A935
CPU S-SPECK: SLBEW
QPI/VTT 1.18
CPU VOLTS: 1.152
CPU COOLING: Air
BRAND AND MODEL OF COOLER: PT Megahalems+1x120 D12SH-12/PWM/
MOBO BRAND AND MODEL: GB EX58-EXTREME
BIOS VERSION: F8x
OS: Win 7 64
RAM BRAND: Corsair
RAM MODEL: TR3X6G1600C8
RAM MHZ: 1528
RAM TIMMINGS: 8-8-8-24

[dorkiedoode]

CPU:Xeon W3520
USERNAME:angelreaper
CPU MHZ: 4.011 Ghz
HT: ON
CPU BATCH: 3845A935
CPU S-SPECK: SLBEW
QPI/VTT 1.18
CPU VOLTS: 1.152
CPU COOLING: Air
BRAND AND MODEL OF COOLER: PT Megahalems+1x120 D12SH-12/PWM/
MOBO BRAND AND MODEL: GB EX58-EXTREME
BIOS VERSION: F8x
OS: Win 7 64
RAM BRAND: Corsair
RAM MODEL: TR3X6G1600C8
RAM MHZ: 1528
RAM TIMMINGS: 8-8-8-24

nice clock and voltage! But unfortunately you need to show at least 8 hours of stress testing.

[fallwind]

Picked up another D0 for a cruncher, it's a very new batch so I thought I'd post it up for those interested. Nothing spectacular here though.


CPU: i7 920
USERNAME:fallwind
CPU MHZ: 4.011 Ghz
HT: ON
CPU BATCH: 3913A961
CPU S-SPECK: SLBEJ
QPI/VTT 1.175
CPU VOLTS: 1.296
CPU COOLING: Water
BRAND AND MODEL OF COOLER: HK 3.0
MOBO BRAND AND MODEL: GB EX58-UD3R
BIOS VERSION: F5
OS: Vista Ultimate x64
RAM BRAND: Corsair
RAM MODEL: TR3X6G1866C7GTF
RAM MHZ: 1528
RAM TIMMINGS: 6-7-6-18

[xpatar]

After crossflashing from v0504 to v0007 I managed to raise my oc without turbo throttling,

CPU: i7 920
USERNAME: xpatar
CPU MHZ: 4.322ghz
HT: OFF
CPU BATCH: 3837A898
CPU S-SPECK: SLBCH
CPU VOLTS: 1.55v
CPU COOLING: Water
BRAND AND MODEL OF COOLER: Watercool HK CPU LGA1366 Rev. 3.0 LT
MOBO BRAND AND MODEL: ASUS P6T DELUXE V2
BIOS VERSION: 0007
OS: Vista x64
RAM BRAND: CORSAIR
RAM MODEL: TR3X6G1866C7GTF
RAM MHZ: 1651
RAM TIMINGS: 7-7-7-20-1T
QPI/VTT: 1.55v

Prime95 9 hours stable

[MarcusFoX]

did this on 1403 41hrs of goodness... im gunna test 1503 soon heard its awsome

CPU: i7 920
USERNAME:MarcusFoX
CPU MHZ: 4.405 Ghz
HT: ON
CPU BATCH: 3849B202
CPU S-SPECK: SLBEJ
QPI/VTT 1.400
CPU VOLTS: 1.400
CPU COOLING: Water
BRAND AND MODEL OF COOLER: D-tek V2
MOBO BRAND AND MODEL: Rampage II Extreme
BIOS VERSION: 1403
OS: Vista Ultimate x64
RAM BRAND: OCZ
RAM MODEL: OCZ3P1600LV6GK
RAM MHZ: 1680
RAM TIMMINGS: 7-7-7-20-6-60-1T 1.65v

[sinister1st]

CPU: i7 920 c0/c1
USERNAME: SINISTER1ST
CPU MHZ: 3.959 24-7 prime/linx
HT: ON -of course
CPU BATCH: 3837A727
CPU S-SPECK: SLBCH
QPI/VTT +170=??
CPU VOLTS: +200=1.49
CPU COOLING: AIR
BRAND AND MODEL OF COOLER: THERMALRIGHT TRUE
MOBO BRAND AND MODEL: MSI X58 PLATINUM
OS: VISTA X64
RAM BRAND: OCZ GOLD / KINGSTON 12GB 2 kits
RAM MODEL: OCZ--OCZ3G2000LV6GK /KINGSTON-9905403-001.A00LF
RAM TIMMINGS:6-6-6-24


Your settings should run any app without having to change voltages or compromise TO GET THE NEXT APP TO WORK RIGHT. THEY SHOULD ALL RUN 24-7 STYLIE LINX is GODLIKE

[MarcusFoX]

good job..bro I bet if you turned off HT you'd get higher clocks in LinX with that c0.

[bluehaze]

Nice work everyone, just a reminder:

[B]
NEW RULES UPDATE
THIS IS FOR 8 HOUR STABLE CORE i7 CPUS. I NEED TO SEE OCCT OR PRIME 95 RUNNING WITH CPU-Z SCREEN SHOT. NO EXCEPTIONS

Prime should be running in your screenshots because otherwise it's rather simple to cheat i.e. just stop Prime then set whatever clocks you want before taking a screenshot

Cheers

[ReverendMaynard]

did this on 1403 41hrs of goodness... im gunna test 1503 soon heard its awsome

CPU: i7 920
USERNAME:MarcusFoX
CPU MHZ: 4.405 Ghz
HT: ON
CPU BATCH: 3849B202
CPU S-SPECK: SLBEJ
QPI/VTT 1.400
CPU VOLTS: 1.400
CPU COOLING: Water
BRAND AND MODEL OF COOLER: D-tek V2
MOBO BRAND AND MODEL: Rampage II Extreme
BIOS VERSION: 1403
OS: Vista Ultimate x64
RAM BRAND: OCZ
RAM MODEL: OCZ3P1600LV6GK
RAM MHZ: 1680
RAM TIMMINGS: 7-7-7-20-6-60-1T 1.65v

Why is your tjmax set at 95C? Even with it set wrong, your temps are chilled water, not regular.

[rge]

Why is your tjmax set at 95C? Even with it set wrong, your temps are chilled water, not regular.

I had to look at his for a while as well, weird in that realtemp was saying 4.2ghz..it tends to stay at what you boot on some earlier versions.

I was thinking chilled too, until I saw he actually set off prochot (checked), so he hit 100C at some point during load, then looking at min/max, he just hit reset on real temp after stopping prime....so just seeing idle temps.

[xpatar]

Nice work everyone, just a reminder:



Prime should be running in your screenshots because otherwise it's rather simple to cheat i.e. just stop Prime then set whatever clocks you want before taking a screenshot

Cheers

Correct. Also a good sign to avoid turbo throttling in mobos that support the feature.

[MarcusFoX]

Why is your tjmax set at 95C? Even with it set wrong, your temps are chilled water, not regular.

I had to look at his for a while as well, weird in that realtemp was saying 4.2ghz..it tends to stay at what you boot on some earlier versions.

were do you see a tjmax of 95c??? idk... the cpus tjmax is 95c... and the reason why the temps arnt as high as they should be on the max side is because I restarted realtemp and it reset itself. Also Realtemp shows the turbo speed idk why?? I have an R2E so I can shut Turbo off.

If you guys wont accept this I can run another 41 hours I will gladly do this again and leave it running this time.

[bluehaze]

were do you see a tjmax of 95c??? idk... the cpus tjmax is 95c... and the reason why the temps arnt as high as they should me on the max side is because I restarted realtemp and it reset itself.

If you guys want I can waste me electricity for another 41 hours and gladly do this again and leave it running this time.

dont make a difference to me.

No need to waste your electricity, it's just that when you post screenshot without prime running and temps in the 40's it's kind of pointless. I really wasn't even thinking of your post when I reitereated the prime running part as yours is quite obvious however justin.kerrs 4.6 ht on with 70 degree temps looks as if prime was running but it was not and I have attempted to duplicate his results with water in and water out temps only .5 degree difference and 2 degree difference between water and ambient there is just no way regardless of how many rads he has that he is getting those temps without a chiller or phase setup or something dropping his ambients way below anything normal. Perhaps he is running his computer in an igloo while ice fishing in Alaska?