Live MB OC Report :: ASUS Rampage Extreme

[Gullo92]

Okey guys time to rise to the occasion, I have run two Super Pi on my EP45T-UD3P and now it´s time to compare this with Rampage Extreme.

Seriously, it would be nice to compare the two boards with each others with the same kind of quad @ the same FSB, clockspeed and 2x2Gb ram.

This was done with Windows 7 RC 64bit and with no optimizations, a Q9650 @ 500, 4,5GHz and 2x2Gb ram @ 1600 777 21 tRD 9.

Anyone interested.

nice overclock ghost with the help of your setting i overclocked my pc: q9550 c1 corsair 1800 2x1gb dominator rampage extreme(bios 1201) sapphire hd 4870 512.
thi is my settings:

Ai Overclock Tuner : Manual
Oc From Cpu Levet Up : Auto
Oc From Memory Level Up : Auto
FSB Frequency : 465
CPU ratio sitting : 8.5x

CPU configuration :
--------------------------- :
C1E support : disabled
Cpu TM function : disabled
Max CPUID value limit : disabled
Vanderpool technology : disabled
Execute disable bit : disabled
Core multi-processing : enabled

* CPU clock skew : Delay 300ps
* NB clok skew : Delay 100ps
FSB Strap to North Bridge : 400
PCIE Frequency : 100
DRAM Frequency : DDR3-1860mhz
DRAM Command Rate : 1N
DRAM Timing Control : Manual

1ST INFORMATION
CAS# latency : : 7
RAS# to CAS# delay : : 7
RAS# PRE time : 7
RAS# ACT time : 21
RAS# to RAS# delay : AUTO
REF cycle time : AUTO
WRITE recovery time : AUTO
READ to PRE time : AUTO

2ND INFORMATION
READ to WRITE delay(S/D) : AUTO
WRITE to READ delay(S) : AUTO
WRITE to READ delay(D) : AUTO
READ to READ delay(S) : AUTO
READ to READ delay(D) : AUTO
WRITE to WRITE delay(S) : AUTO
WRITE to WRITE delay(D) : AUTO

3RD INFORMATION
WRITE to PRE delay : AUTO
READ to PRE delay : AUTO
PRE to PRE delay : AUTO
ALL PRE to ACT delay : AUTO
ALL PRE to REF delay : AUTO

DRAM Static Read Control : disabled
DRAM Dynamic Write Control : disabled

DRAM Skew Control :
------------------------------ :
DRAM CMD skew on channel A : auto
DRAM CLK skew on DIMM A1 : auto
DRAM CLK skew on DIMM A2 : auto
DRAM CTL skew on DIMM A1 : auto
DRAM CLT skew on DIMM A2 : auto

DRAM CMD skew on channel B : auto
DRAM CLK skew on DIMM B1 : auto
DRAM CLK skew on DIMM B2 : auto
DRAM CTL skew on DIMM B1 : auto
DRAM CTL skew on DIMM B2 : auto

Ai Clock Twister: Strong
Ai Transaction Booster: Manual

Common Performance Level : 06

Pull-in of CHA PH1 : disabled :
Pull in of CHA PH2 : disabled :
Pull in of CHB PH1 : disabled :
Pull in of CHB PH2 : disabled :

EPU II phase control : auto

CPU Voltage : 1.468
Load-line calibration : Disabled
CPU PLL voltage : 1.577
FSB termination voltage : 1.28566
CPU GTLVref(0) : +50mv
CPU GTLVref(1) : +50mv
CPU GTLVref(2) : +50mv
CPU GTLVref(3) : +50mv
NB GTLVref : +60mv
North bridge voltage : 1.60372
DRAM voltage : 2.10v
NB DDRVref : auto
DDR3 channel A Vref : auto
DDR3 channel B Vref : auto
South bridge 1.5 voltage : 1.51106
South bridge 1.05 voltage : 1.06039
CPU spread spectrum : Disabled
PCIE spread spectrum : Disabled

i tested this setting with 1 h 30 minutes of prime and i stopped it excuse me for my english i'm italian