** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[andressergio]

Sergio, it you dont mind rerun that setup under win7, curious to see the difference from xp to 7201.

Sure mate will do tonite

Cheers
Sergio

[the_real_7]

QX9650 at 515x8.5 waku by Dtek-Fuzion & TripleRad
Gigabyte EP45-UD3P (air + 90cfm fan)
Gigabyte HD4670
2 x 1024mb Crucial BallistiX Tracer pc2-8500
Corsair HX1000

wow thats nice maxine 515 at 4 4 4 12 awesome , alos see your using a dtek fusion block I though i was the only person using

[Ghostleader]

I am running 8 Gigs of ram at 1:1 with 5-5-5-15 pl 9.
I know my ram is holding my oc back. My Bandwidth are between 9200 - 9300 with latency of 58 or so.
When i try go higher i will SS a everst benchmark.
So my slightly higher card gets balanced by your higher memory bandwidth. COOL

These EP45 are some awesome boards, FSB 500+ with a quad, 8Gb ram and tight tRD

here's mine



Cheers
Sergio

You got a pretty nice chip there, Sergio and my GTX 285 is on air but maybe I can push it some but not much so it´s hard to keep up with you.

I think it´s interesting to compare the DDR2 vs DDR3 of those EP45 board.

I´ll try to get a 3DMark06 in XP at the same FSB, clock speed and try to get my VGA up to yours VGA clock, if I can´t reach your VGA clock speed could you consider to lower yours to my clock and rerun your 3DMark06 in XP.

Should be nice to compare that with only the ram speed as a different.

BTW, sure it´s a show off but it´s a nice one.

[jonathankru]

These EP45 are some awesome boards, FSB 500+ with a quad, 8Gb ram and tight tRD



You got a pretty nice chip there, Sergio and my GTX 285 is on air but maybe I can push it some but not much so it´s hard to keep up with you.

I think it´s interesting to compare the DDR2 vs DDR3 of those EP45 board.

I´ll try to get a 3DMark06 in XP at the same FSB, clock speed and try to get my VGA up to yours VGA clock, if I can´t reach your VGA clock speed could you consider to lower yours to my clock and rerun your 3DMark06 in XP.

Should be nice to compare that with only the ram speed as a different.

BTW, sure it´s a show off but it´s a nice one.

I didnt see how high andressergio shaders are running. Daaammmnnnn
I can`t get to 1700. I assume WC the GPU helps that?

[OC Nub]

Does anyone know if these two sets of Ram the same other than the hs?
http://www.newegg.com/Product/Produc...82E16820227455
http://www.newegg.com/Product/Produc...82E16820227458

[Leeghoofd]

I didnt see how high andressergio shaders are running. Daaammmnnnn
I can`t get to 1700. I assume WC the GPU helps that?

Think Sergio is running 1800 shaders : WC and voltmod (both out of the box with this BFG) helps big time, such great cards

[Hoss331]

Does anyone know if these two sets of Ram the same other than the hs?
http://www.newegg.com/Product/Produc...82E16820227455
http://www.newegg.com/Product/Produc...82E16820227458

Yes, only difference is HS.

[jonathankru]

Nice to see

Here´s mine EPT45 Q9650 @ 512 ~4,6GHz with 2x2 ram @ 1638 777 21 tRD 9.

3DMark06 are pretty close, you got better VGA points due to higher core clock but I got higher CPU score probably due to better bandwidth and latency from my ram.

Do you run ram @ 1000 CAS5 and with which tRD?
Screenie of bandwidth and latency maybe?

We see the similary tendency with 3DMark Vantage as with the 3DMark06.

Here it is. I have tweaked the ram slightly

[jonathankru]

Think Sergio is running 1800 shaders : WC and voltmod (both out of the box with this BFG) helps big time, such great cards

Yeah, That is what amazed me so much. I am so far behind
My limit is 1690.

Nice Card.

[andressergio]

Hoss31 this is the same run on Win7 7201x64 hughe difference...i just gave a notch of vcore and MCH as i did the other run on XP32 wich needs less volts

when i run 3DM06 Win7 disables color scheme and goes to basic...

this is at 4608/1229 my actual 24/7 with 1,408 vcore



this is at 4635/1236 just a test with 1,42 vcore



Cheers
Sergio

[andressergio]

Think Sergio is running 1800 shaders : WC and voltmod (both out of the box with this BFG) helps big time, such great cards

yes leeg, 771/1800/3012 is what i run unigine / 3dm06 and Crysis Stable awesome card

Cheers
Sergio

[andressergio]

These EP45 are some awesome boards, FSB 500+ with a quad, 8Gb ram and tight tRD

You got a pretty nice chip there, Sergio and my GTX 285 is on air but maybe I can push it some but not much so it´s hard to keep up with you.

I think it´s interesting to compare the DDR2 vs DDR3 of those EP45 board.

I´ll try to get a 3DMark06 in XP at the same FSB, clock speed and try to get my VGA up to yours VGA clock, if I can´t reach your VGA clock speed could you consider to lower yours to my clock and rerun your 3DMark06 in XP.

Should be nice to compare that with only the ram speed as a different.

BTW, sure it´s a show off but it´s a nice one.

thank you mate, wasnt my intention to show anything its just im proud of the hardware i have now, it costed a lot of time, money and big big waiting times with great help from ppl from the forum like Jor3lBR

Cheers
Sergio

[OC Nub]

Yes, only difference is HS.

Thanks, out of stock but I was able to get the OCZ Platinum 1150's with 1.8v, just put them in. Will see how they do this weekend. I have a feeling they are binned and would be 1200's otherwise but 1150 is all I need for now.

[Hoss331]

Hoss31 this is the same run on Win7 7201x64 hughe difference...i just gave a notch of vcore and MCH as i did the other run on XP32 wich needs less volts

when i run 3DM06 Win7 disables color scheme and goes to basic...

Cool thanks, win7 is still hitting the scores pretty hard vs xp.

[andressergio]

Cool thanks, win7 is still hitting the scores pretty hard vs xp.

yep but i think that maybe on 32bit Win7 score will be bit better as in x64 3DM06 runs 32bit emulated...

Cheers
Sergio

[Hoss331]

Thanks, out of stock but I was able to get the OCZ Platinum 1150's with 1.8v, just put them in. Will see how they do this weekend. I have a feeling they are binned and would be 1200's otherwise but 1150 is all I need for now.

There definitely nice sticks and most seem to oc well. The 1200s were only instock at the egg for maybe 2 days, I was checking availability daily to make sure I got a set when they first popped up. I played with mine a little today and got them to 1300, not stable though.

[andressergio]

There definitely nice sticks and most seem to oc well. The 1200s were only instock at the egg for maybe 2 days, I was checking availability daily to make sure I got a set when they first popped up. I played with mine a little today and got them to 1300, not stable though.

great job hoss, whats your template for that 8,5 config ?

cheers
Sergio

[andressergio]

just installed nvidia 186.08 drivers (i removed on safe mode 185.85) and all benches give me lower points

[OC Nub]

There definitely nice sticks and most seem to oc well. The 1200s were only instock at the egg for maybe 2 days, I was checking availability daily to make sure I got a set when they first popped up. I played with mine a little today and got them to 1300, not stable though.

1300 into windows is pretty damn good.

[xzulu]

just installed nvidia 186.08 drivers (i removed on safe mode 185.85) and all benches give me lower points

Sergio, just stick to 185.85 for the meantime.

[OC Nub]

With my new OCZ Platinum pc2 9200 1.8v ram i cannot get into windows at 1150 with pl8 L M A O. Been a bad week for me and hardware. Time for a new platform.

[andressergio]

Sergio, just stick to 185.85 for the meantime.

thanx mate i just re installed them

[Hoss331]

great job hoss, whats your template for that 8,5 config ?

cheers
Sergio

Basically the same as the other one I showed you, just at 8.5 with some more nb and vdimm.

[Hoss331]

With my new OCZ Platinum pc2 9200 1.8v ram i cannot get into windows at 1150 with pl8 L M A O. Been a bad week for me and hardware. Time for a new platform.

What settings are you using? Also remember these boards seem to undervolt on vdimm so you may have to use 1.82-1.84 in bios/et6. Check your actual voltage with everest or even HW monitor in ET6.

[jonathankru]

just installed nvidia 186.08 drivers (i removed on safe mode 185.85) and all benches give me lower points

Thanks for testing 186.08. I was about to install that driver now. I`ll stay with 185.85.