Micron D9 GMH\GKX\JKH etc club

[Slyr7.62]

they need 2.3v for 1200+ cas5
2.3 cas3 850mhz
2.45 1200 cas4
max speed is 1320 2.45v
they dont even boot below 2.1 lol

Thnx for the info. I guess for you that somewhat high voltage is ok as long as the ram still works, right.
Lol, I cherish this Kingston GKX I have so I don't exactly ever want to burn it up.

thx

1200 cas5 with 1.85 for everest test, with 1.92 it was stable for memtest

oooo, good to know. I just run 1.9V 24/7 but haven't taken my GKX past 1100mhz yet. .
I suppose I should actually (try to) do a lower Vdimm like 1.84-1.88V (@ least for 5-5-5-15 1066).

very nice Cell ShocksMicron D9GKX are god's chips

Oh, yes they sure are. That's to both sentences there.

Thanks!

Will try to break 11k tonight with some settings I want to try!
I'm getting my first Cellshock kit ( 1066 CL5 ) soon, eagerly awaiting what they can do.

Have fun and Good luck.

[Ender17]

hey guys, sorry if this isn't allowed, but I have some Crucial 2 x 1GB PC2-8000 Ballistix Tracer BL12864AL1005.16FD3 Micron D9GMH for sale $50
http://www.xtremesystems.org/forums/...d.php?t=222621

[Don_Dan]

Have fun and Good luck.

Thanks, I'm sure I will have fun when I finally got the time to do it, my new job is eating up my free time...
BUT I got my Cellshock kit

hey guys, sorry if this isn't allowed, but I have some Crucial 2 x 1GB PC2-8000 Ballistix Tracer BL12864AL1005.16FD3 Micron D9GMH for sale $50
http://www.xtremesystems.org/forums/...d.php?t=222621

Selling and trading isn't allowed in normal threads as far as I know, please keep it to PM and dedicated threads.

[Drix]

Here are my results with Team Xtreem PC2-9600

I managed to get it Pi32M stable at 1333MHz C5/PL8

[elmysterio]

i done that
compared gigabut x38 and p35 with all my saved runs
the dfi utx38 beat em both clock for clock and doesnt kill harware lol
and the dfi ut p35 beat the dfi ut-x38
i boxin my ut-p35 this week cause i gonna crossfire 2 4870s
yes the gigabut has ram clockin wr but i wanna see everest bandwidth lol

simone you 1000% wrong
utp35=utp45
do u know dfi got fsb wr

UTP 35 = DFI LP LT P35-T2R HEATSINK the performance ?

[zsamz_]

UTP 35 = DFI LP LT P35-T2R HEATSINK the performance ?

i think so but not too sure
first thing i did was take the heatpipe crap off

[Don_Dan]

As I said, I got my Cellshock kit and tried what I could get on PL8.

The results I made are a bit frustrating, to say the least, not very happy with my kit. I was also testing the latest BIOS but I tried everything to get them higher. The system would bluescreen at 520MHz FSB and 624MHz RAM already...



Any suggestions or something I overlooked that could hold me back?

It cost my >3 hours to do this already, so I pulled them out again, will try to do a good result on PL8 with another kit.

For now I will test something new, that a lot of you guys will like. Watch out for a new thread!

[tool_462]

For now I will test something new, that a lot of you guys will like. Watch out for a new thread!

Hope its OCZ Low Voltage

[Don_Dan]

Hope its OCZ Low Voltage

[radaja]

well it's been awhile since i posted here.so i got a great new cpu and another kit of cellshock pc8000's
that are turning out to be pretty decent.ddr1200 w/2.08v


and heres some Pi run and everest scores

8x545@4360 ddr1308 pl8 32m Pi


8x545@4360 ddr1308 pl8 1m Pi


everest

[kagula323]

nice results radaja . those d9 gkx chips are pure gold just like u'r new cpu
I have the oportunity to buy Mushkin Redline 2Gb (2x1Gb) DDR2-1000 (996525) (4-5-4-11) with D9GMH.
I wanna know if they are modules capable of 1200-1300MHZ with good voltages for dailly use? I have a pair of thermalright hr-07 memory heatspreaders that I could use on them in case they get hot

[WaterFlex]

Who else has Red CellShock like me?

[radaja]

kagula323,i bought the same kit but one module was bad.but i put the good one in with my cellshock pc8000's for 3GB and they all did 1200 easy
so i would guess you shouldnt have a problem doing 1200 24/7

waterflex,your the only person i know of that has this kit.are you sure they didnt just make one kit

[kagula323]

I think he painted them :P


Edit: 10x radaja ... hope I'll buy them

[WaterFlex]

radaja, dunno... but i love my red sexy shocks, i want more 2GB.

[radaja]

i remember when i first got my cellshock pc8000's and i saw yours and you posted some results
then i looked and looked but nothing,and then someone said they could be found easy in germany so i looked and no luck.
i wanted them so bad and your right the heatspreaders are a big factor in my wanting them.they are awesome looking

[Don_Dan]

WaterFlex, you are the only one I know who has those sticks, even in Germany they are rare, and I'm watching ebay very carefully...

[WaterFlex]

I`m looking for the red Shocks of 25/07 manufacturing date. All sticks manufuctered later are bad.
Mine are 25/07(week/year)

[radaja]

heres my latest.ddr1200 5-5-4-12-30 pl8 w/2.14 bios 2.10 load


everest score

[Ket]

Hopefully I can throw a new CPU in soon and mess around properly, my E7200 has not been kind to me.

[radaja]

came across this pic i took awhile back
d9 micron :banana::banana::banana::banana:.

[User111]

Here are my results with Team Xtreem PC2-9600

I managed to get it Pi32M stable at 1333MHz C5/PL8

vdimm?

[radaja]

got this today with my cellshock pc 8000cl4's
8x550@4400 w/1.29v ddr1320 pl8 w/2.28v





going to try for 8x563@4504 ddr1351.but i doubt i can do it.

[Drix]

vdimm?

'Only' 2.45v so it's their rated voltage (2.35-2.45v) with a good old 80mm HZ's fan on it.
And it doesn't work better with more juice if i remember well

[radaja]

well i couldnt seem to get 560x8 stable(orthos blend) so i just ran 1mPi and
took and everest SS.this is at pl9.im going to see if i can get 560fsb ddr1340 pl8
and run 32m Pi.because at 556x8 ddr1333 pl8 i got 12019 copy score.



556x8 ddr1333 pl8