Just received this board to replace my P6T Deluxe V2, My D0 chip can run LinX/Prime @4.51Ghz with the Asus but I'm still struggling to get this thing stable on this EVGA vanilla board, keep getting BSOD with 124 after 3min or so, raising the vtt all the way up to 1.52 underload didn't help either, and the PCIE is maxed out at 103, both NICs disappeared in Windows if I set the PCIE to 104. With the Asus we have the QPI/Vtt voltage needed only 1.35v but this EVGA I'm seeing a vtt and QPI vcore separated...are they kinda correlated? if say it needed vtt 1.40v do I have to bump up the QPI PLL Vcore to 1.40v to match the vtt as well?

The 8-pin power connector is in the oddest position hiding behind the VREG heatsink, dang hard to get to. And man as soon as I load up LinX the VREG shot up to 92'C...this puny little POS VREG sink ain't cutting it yo!