MMM
Results 1 to 25 of 4708

Thread: X48 Rampage Formula Preview.

Threaded View

  1. #9
    Xtreme Member
    Join Date
    Jul 2007
    Location
    Planet of the Apes
    Posts
    251
    [QUOTE=greg.m;3797497]Well i found out the volts i can run stable/errorfree 8.5x485fsb @ 1213.
    My system likes normal skews only. After many many combinations i realized that the most important setting was nbv. In the beginning i started with 1.51nbv and i got a lot of errors and lock ups. I thought it was fsbv, vcore or ramv. I played with skews but nothing. I raised nbv a little @ 1.53 and then @ 1.55 but i kept getting lock ups during memtest without giving any errors before.The reason i raised nbv so little was that @ 8.5x480(only 5mhz lower than 485) i needed 1.49 to have a stable system. I went up @ 1.61v and i run 70-80%memtest without errors before my system freezed again. Finally i managed to find the magic - almost skyhigh - nbv setting...and that is...1.65. after that i could lower vcore from 1.325 to 1.29... Now ill try to lower ramv and see how itll go.

    QUOTE]

    bios 0803 settings:

    Code:
    Ai Overclock Tuner [Manual]
    CPU Ratio Setting [8.5]
    FSB Strap to North Bridge [Auto]
    FSB Frequency [485MHz]
    PCIE Frequency [105MHz]
    
    DRAM Frequency [1216MHz]
    DRAM Command Rate [Auto]
    DRAM CLK Skew on Channel A/B [Auto]
    DRAM TimingControl [Manual]-5-5-5-15
    DRAM Static Read Control [Enabled]
    Ai Clock Twister [Moderate]
    Ai Transaction Booster [Manual]
    Common Performance Level [07]
    Pull-In of CH A/B all disabled
    
    CPU Voltage [1.29375]
    CPU PLL Voltage [1.50V]
    North Bridge Voltage [1.65V] - 1.63V real
    DRAM Voltage [2.10V]
    FSB Termination Voltage [1.46V] - 1.38V real
    South Bridge Voltage [Auto]
    SB 1.5V Voltage [Auto]
    Loadline Calibration [Enabled]
    CPU GTL Voltage Reference [0.63X]
    NB GTL Voltage Reference [0.67X]
    DRAM Controller Voltage REF [Auto]
    DRAM Channel A/B Voltage REF [Auto]
    
    CPU Spread Spectrum [Auto]
    PCIE Spread Spectrum [Auto]
    CPU Clock Skew [Normal]
    NB Clock Skew [Normal]
    
    
    CPU Ratio Setting [8.5]
    C1E Support [Disabled]
    CPU TM Function [Disabled]
    Vanderpool Technology [Disabled]
    Execute Disable Bit [Enabled]
    Max CPUID Value Limit [Disabled]
    Intel(R) SpeedStep (TM) Tech. [Disabled]
    Last edited by greg.m; 05-19-2009 at 04:02 PM.
    Xigmatek Elysium - ASUS P8Z77-WS - 3770K Testing.... - G.SKILL 16gb F3-17000CL9Q-16GBZH @ 2133 - ASUS 7970 MATRIX Platinum - Corsair AX 1200w

    CPU EK-Supreme HF nickel plated - Pumps 2 x Laing DDC-1Plus with EK-DDC Dual TOP V.2 - Radiator ThermoChill PA120.3

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •