Quote Originally Posted by A-Grey View Post
Try to run Prime95 Small FFT's to adjust your CPU Voltage and your FSB termination Voltage and Prime95 Large FFT's for your NB Voltage.

When you've got that stable for 10-15 minutes you can run Linx to tweak your GTL's in combination with the FSB Termination Voltage and adjusting the CPU Voltage.

When you can run 25 passes stable in Linx you can go to Prime95 again and run Blend Mode to see what needs to be done to keep it stable for a long time.
When you still fail Large FFT's it is your NB or FSB Termination Voltage.

Thats for the feedback. Will put down some time on this.