Here's a direct link:
2104
Here's a direct link:
2104
QX 9650 | Maximus II Formula | G.SKILL 4GB (2 x 2GB) PC2 8500 | Sapphire 4850 X2 2GB| Auzen X-Fi Prelude 7.1 | 3x's WD 150GB Raptors & 2x's 1TB Seagate 7200.11 | Silverstone OP1200 | SilverStone TJ07 | Dell 2707WFP
EK-RES 250 --> Swiftech MCP655 --> Apogee GTZ --> Enzotech Sapphire NB --> Feser X-Changer 360
Thanks for linkOriginally Posted by TouGe
Interested if it will allow a few more mhz from my ram
OK..I've tried '2104'..
vNB-VTT issue : Present
Pull-ins NOT Working:Present
A little bit Lower Ram Bandwith at my 1901 27/4 Settings: Present
BSODs At my 24/7 Settings:Present
BIOS 1901
BIOS 2104
Same Settings All Pull-ins enabled.
Nice Work.. ASS-SUS© BIOS Engineers.
It took 5 months to add one more ''OC CPU Level Up'' Entry.(The only change this Bios has).
ASUS=
Could you please upload your bios setting please?OK..I've tried '2104'..
vNB-VTT issue : Present
Pull-ins NOT Working:Present
A little bit Lower Ram Bandwith at my 1901 27/4 Settings: Present
BSODs At my 24/7 Settings:Present
BIOS 1901
IMG...
BIOS 2104
Same Settings All Pull-ins enabled.
IMG...
Nice Work.. ASS-SUS© BIOS Engineers.
It took 5 months to add one more ''OC CPU Level Up'' Entry.
ASUS=
otherwise im not able to boot up with 1:1 fsb:dram at all!
C2D E8400, Asus Striker Extreme, 2x1GB Corsair Dominator, GTX260 Asus, 2x WD Raptor 150GB RAID0, Creative X-Fi Xtreme Gamer, CoolerMaster Real Power M620 620W. bios v.1803
Code:Ai Overclock Tuner: Manual OC From CPU Level Up: Crazy Ratio CMOS Setting: 9 FSB Frequency: 470 CPU Clock Skew: Auto NB Clock Skew: Auto FSB Strap to North Bridge: 333MHz DRAM Frequency: 1129Mhz DRAM CLK Skew on Channel A1: Auto DRAM CLK Skew on Channel A2: Auto DRAM CLK Skew on Channel B1: Auto DRAM CLK Skew on Channel B2: Auto DRAM Timing Control: Auto DRAM Static Read Control:Disabled DRAM Read Training: Disabled MEM. OC Charger:Enabled Ai Clock Twister: Moderate Ai Transaction Booster : Manual Common Performance Level [8] Pull-In of CHA PH1 Disabled Pull-In of CHA PH2 Disabled Pull-In of CHA PH3 Disabled Pull-In of CHA PH4 Disabled Pull-In of CHA PH5 Disabled Pull-In of CHB PH1 Disabled Pull-In of CHB PH2 Disabled Pull-In of CHB PH3 Disabled Pull-In of CHB PH4 Disabled Pull-In of CHB PH5 Disabled PCIE Frequency : 100 CPU Voltage: 1.25 CPU PLL Voltage:1.56 FSB Termination Voltage:1.20 DRAM Voltage: 2.05 North Bridge Voltage:1.335 South Bridge 1.5 Voltage: 1.52 South Bridge 1.1 Voltage: 1.12 CPU GTL Reference (0): Auto CPU GTL Reference (1): Auto CPU GTL Reference (2): Auto CPU GTL Reference (3): Auto NB GTL Reference: Auto DDR2 ChA Reference Voltage: Auto DDR2 ChB Reference Voltage: Auto North Bridge DDR Reference: Auto CPU Configuration: Ratio CMOS Setting: 9 C1E Support: Disabled Max CPUID Value Limit: Disabled Intel Virtualization Tech: Disabled CPU TM Function: Disabled Execute Disable Bit: Enabled Load-Line Calibration: Enabled CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled
That would be why I dropped the extra money on an i7 setup rather than deal with thisOK..I've tried '2104'..
vNB-VTT issue : Present
Pull-ins NOT Working:Present
A little bit Lower Ram Bandwith at my 1901 27/4 Settings: Present
BSODs At my 24/7 Settings:Present
Nice Work.. ASS-SUS© BIOS Engineers.
It took 5 months to add one more ''OC CPU Level Up'' Entry.
ASUS=.
Atleast they didn't break the CPU multiplier again
Reply With Quote
Bookmarks