nice Praz, total SSD based system I see

Quote Originally Posted by msgclb View Post
Does your experience using a Feser Quad with the DFI UT X58 tell you that it's needed or did you just get a good deal? Ever since I noticed that you went with a quad I've been looking but over here all I see is 'Out of Stock'.
Well feser 480 was selling at feser 360 prices here locally as retailer was doing a special to make up for the fact he didn't have feser 360 stock - so choice was obvious

4//28 looking sweet indeed 8x 32M Super Pi instance via HyperPi @DDR3-2080Mhz 7-8-7-20 1T at 1.725v bios set vdimm = 1.730v real DMM vdimm.





New SG Skin used http://i4memory.com/f80/dfi-ut-x58-t...n-skins-17321/

Both cstkl1 and my DFI contact suggested with 4/28 bios, I check out setting BOOT Up CPU Base Clock to around 180-185bclk for better perrformance and stability. Seems to work as first test has me reducing my required CPU VTT volts from 1.43v to 1.37v for 8x 32M Pi test!!!!





* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: AUTO
CPU Base Clock (BCLK): 200 Mhz
Boot Up CPU Base Clock: 185 Mhz
PCIE Clock: 104 Mhz
DRAM Frequency: 10x Memory multipliers
UnCore Frequency: 20x Uncore multipliers
Bumped CPU VTT from 1.37v bios to 1.39v bios and IOH/ICH v1.1 from 1.11 to 1.13v for Linx stability