Thanks for your advice. Linpack passed 10 out of 10. Now running OCCT just to make sure . My temps are a bit high with linpack:

but i think thats ok. With anything else dosen't go above 55C/Core

Quote Originally Posted by Grnfinger View Post
try this....
First enable Enable load line calibration and retest, vdroop could be your problem...if it still fails then try the following

CPU Clock Skew : Delay 100ps

CPU GTL Reference 0 : -40mv
CPU GTL Reference 1 : Auto
CPU GTL Reference 2 : -40mv
CPU GTL Reference 3 : Auto

If its still crapping out you will need more PLL or vcore