Quote Originally Posted by SwIeRsZcZ View Post
@Eve

I raised voltages on: IOH/ICH 1.1 Volt from def. 1.11 to 1.15v

and

IOH Analog Volt , from 1.10 to 1.15v .

And still having the problem... I have to keep pressing DEL all the time during reboot to enter the bios (and even this method doesn't work every time) or completely turn off computer, unplug power cord then plug itagain and try to enter bios again... NO IDEA what's going on....

--------------------
Finally I succeded in flashing to 3/18 bios. Firstly I had to downgrade my 2/27 do earlier and then flash to 3/18
tried a different keyboard/mouse combination ?

Quote Originally Posted by ChaosAD View Post
Is it better running vdroop enabled or disabled for every day use?
24/7 i use with vdroop enabled so to adhere to intel's specs of droopage

Quote Originally Posted by SwIeRsZcZ View Post
1. Does your FLAME FREEZER heatpipe attached to I/O connector area ''moves'' ?? I screwed it pretty hard but it still 'moves' U have the same ?

3. How can I get 22x multiplier on my i920 ? (I saw some screens by eva2000) Now I am only able to get x21 at BCLK 190 and Eist function Enabled
yeah it moves a bit, alot less once i used some ceramique thermal paste on the area that attaches to the I/O on board. 22x = disable 3 cores in cpu features or enable s3 mode s63 IIRC (not sure on later as haven't played with 22x since finding out 22x has lower max bclk headroom than say 19x, 20x, or 21x i.e. 21x can hit 229bclk but with 22x max around 205-209bclk.