Quote Originally Posted by OC Nub View Post
Set your PCI Exe Freq to 100 and the CPU PLL to 1.50 for starters.
Actually already did that, forgot to change it when I was filling out the template
Thanks though!!

I did manage to get it to 4.0ghz stable, I think? Have only had a chance to run prime for an hour so far, and ran OCCT3 for two hours; am going to run prime over night tonight and try for at least 8-9hours and see how it goes. Here are the new settings - now to go for 4.2ghz

Code:
//////////////////////////////////////////////////
////////// 4.0GHz - 1+HR. Prime Stable //////////
//////// GA-EP45-UD3P Rev. 1.1 - BIOS F7 ///////
///////////////////////////////////////////////

*************************************************

Robust Graphics Booster [Auto]
CPU Clock Ratio[8]
Fine CPU Clock Ratio [.5]

**********Clock Chip Control*************************

CPU Host Clock Control [Enable]
CPU Host Frequency (Mhz) [471]
PCI Express Frequency (Mhz) [100]
C.I.A 2 [Disable]

*********Advanced Clock Control**********************

CPU Clock Drive [900mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew [0ps]
MCH Clock Skew [50ps]

**********DRAM Performance Control***********

Performance Enhance [Turbo]
Extreme Memory Profile (XMP) [Disabled]
(G) MCH Frequency Latch [400mhZ]
System Memory Multipler [2.00D]
Memory Frequency [942mhz]
DRAM Timing Selectable [Auto]

CAS Latency Time [5]
tRCD [5]
tRP [5]
tRAS [15]

*******Advanced Timing Control***********

tRRD [Auto/Default]
tWTR [Auto/Default]
tWR [Auto/Default]
tRFC [Auto/Default]
tRTP [Auto/Default]
Command Rate (cmd) [Auto/Default]


***********Motherboard Voltage Control*******

Load-Line Calibration [Enabled]
CPU Vcore [1.3375v]
CPU Termination [1.32v]
CPU PLL [1.57v]
CPU Reference [.836]

MCH Core [1.360v]
MCH Reference [.876]
MCH/DRAM Refernce [1.06]
ICH I/O [1.57]
ICH Core [1.20]

DRAM Voltage [2.18v]
DRAM Termination [1.06]
Channel A Ref [Auto]
Channel B Ref [Auto]

*****************Advanced BIOS Features*********

CPU Multithreading [N/A]
Limit CPUID Max to 3 [Disable]
No-Execute memory Protect [Enable]
CPU Enhance Halt (CIE) [Disabled]
C2/C2E State Support [Disable]
C4/C4E State Support [Disable]
CPU Thermal Monitor [Disabled]
CPU EIST Function [Enable]
Virtualization Technology [Disabled]