Micron D9 GMH\GKX\JKH etc club

[zsamz_]

dont touch newer patriot stuff you wont find no d9 in them

[simone18]

and what about kingston hyperX 2x1gb pc8500? are they D9? even if i buy a new kit?

[Shiranui Gen-An]

Dude, just stick to Team Xtreem. Only confirmed D9 stuff that still seems to be in production.

[Mafio]

ep45 extreme bios f8
cellshock pc8000 gkx @ 1000mhz cas3 2.66volt



http://valid.canardpc.com/show_oc.php?id=525060

[simone18]

very well done mate! congrats! and nice voltage

@gen-an: ok....finally i'll go for tg

[Mafio]

very well done mate! congrats! and nice voltage

@gen-an: ok....finally i'll go for tg

thx mate

finally WE go for tg

p.s. doccia, poi skype

[The Water Dog]

I love the Gigabyte Extreme when it comes to memory-oc=)
Nice results Mafio

[Shiranui Gen-An]

I don't know how they did it, but MemoryC managed to stock one kit each of Cellshock 8000 C5 (GKX) and 8500 C5 (GMH). Prices are almost too low for em too. Oh well, I have a set of the G.Skill 8000 HZs on the way.

[Shiranui Gen-An]

Got my G.Skill kit in the other day. Haven't had much luck with them on the DFI X48, gonna try the UD3P.

[radaja]

nice photos Shiranui-Gen-An.those cellshocks didnt last long at memoryc.i couldnt believe the price for the one kit 37$.

[The Water Dog]

Looking forward to see what you can get out of the HZ-set, Shiranui-Gen-An

[CryptiK]

I pushed my begrudging board a couple of MHz higher than my previous everest max speed of 660 MHz, to 667.5 MHz using my TG 8500's.

[CryptiK]

Getting better, managed 672 MHz CL5. ignore the bench results its at low FSB and PL 10.

[lha]

What do you think about this result http://valid.canardpc.com/show_oc.php?id=530225 ?
M2F isnt the best dual channel extreme ram mobo.
and btw i was using PL6

[CryptiK]

Iha - really nice work there, care to share your settings and BIOS version? 1:2 divider doesn't play nice on my board it wont even POST, I'll try flashing to another BIOS and seeing if it works.

For 672 MHz I used:

1.35 vNB
2.40 vdimm
NB DDR Ref +37.5mv
DDR2 CHA/CHB Ref +12.5mv
PL10
5:8 divider

[GeorgeStorm]

Hey
I have the chance to buy some Crucial Ballistix Tracer D9 1bg modules,
2 for £25,
Good deal?
Also thinking of getting the HZ kit available here, 45$ shipped....... (just over £30)
Is either better theoretically? (neither have been really pushed)
The HZ the guy had them at 860 CAS4 2.1v
Crucial was at 1111 Cas5 2.1v I think

Thanks

[lha]

I took hell of lot all volts @ bios

1.43 vNB
3.2 vdimm
PL6
1:2 divider
BIOS version i think is 0901

Gonna do >700 mhz 4-4-4-4 some day

[CryptiK]

I took hell of lot all volts @ bios

1.43 vNB
3.2 vdimm
PL6
1:2 divider
BIOS version i think is 0901

Gonna do >700 mhz 4-4-4-4 some day

3.2v was that on dry ice or air? 5-4-4-4 is still great for 700 MHz.

I'm sitting here with ~1KG of dry ice and I cant use it as I have no insulation materials other than paper towel. I was trying to make a ghetto pot but I cant see it working without massive condensation issues and I don't want to risk killing the board.

[lha]

3.2v was that on dry ice or air? 5-4-4-4 is still great for 700 MHz.

I'm sitting here with ~1KG of dry ice and I cant use it as I have no insulation materials other than paper towel. I was trying to make a ghetto pot but I cant see it working without massive condensation issues and I don't want to risk killing the board.

That was on air. 2x 120mm fans.

[CryptiK]

3.2 on air is pretty crazy stuff, lucky your sticks are still alive heh.

I swapped to BIOS 1901 and 1:2 is working now. I took the cpuz SS then tried to run everest and it crashed unfortunately.

678 MHz CL5 @ 2.45v

[Ch@pS]

3.2v was that on dry ice or air? 5-4-4-4 is still great for 700 MHz.

I'm sitting here with ~1KG of dry ice and I cant use it as I have no insulation materials other than paper towel. I was trying to make a ghetto pot but I cant see it working without massive condensation issues and I don't want to risk killing the board.

Easy solution, flour, or indeed make a paper pot, google eather of them and you're sorted.

[Shiranui Gen-An]

i say 10% chance they are d9gkx i wouldnt touch em
saw them on this weeks sale $29.99 CAD after $20 MIR and i didnt look twice

Yeah, I wouldn't bet on the Firestix: http://www.biwa.ne.jp/~yok/FIRESTIX1...ESTIX1066.html

[Ket]

M2F isnt the best dual channel extreme ram mobo.

Actually, thats not quite true. The M2F just has a limited amount of modules it will work with, but the modules it will work with work across all DIMM banks, thats the sacrafice made, less modules compatible with the board in trade for the modules that are compatible working across all DIMM banks.

[CryptiK]

Actually, thats not quite true. The M2F just has a limited amount of modules it will work with, but the modules it will work with work across all DIMM banks, thats the sacrafice made, less modules compatible with the board in trade for the modules that are compatible working across all DIMM banks.

I'm pretty sure he meant it's not a good ram overclocking board, which it isn't. AFAIK, he has the highest ram overclock on the M2F at 700 MHz CL5 followed by me at 678 MHz CL5.

[Ket]

I wouldnt call 1400MHz a bad result out of DDR2