Quote Originally Posted by ReverendMaynard View Post
I have to ask (respectfully) what's up with the QPI/VTT being set higher than the vcore? At that same speed I run 1.4v vcore and 1.335v QPI/VTT. My personal rule of thumb with these 920's is keep those voltages high on the vcore side and the QPI/VTT around .05v or more lower than the vcore. That helps allot with heat, and from my experience as will a few other mates, that theory works out pretty well on top end frequencies (4.4-4.7ghz). I know cpu's vary allot, but if you gave yourself more time with that setup you'd have it rippin'.
The XMP profiles of 1600Mhz and 1866Mhz for the OCZ PC#-12800 DDR3-1600MHz triple channel ram has 1.4 QPI/VTT as standard. Plus I am running the 1600Mhz XMP profile at 1688Mhz same timings.
Looks like I have another week or two to play with this rig, so I may mount a couple of fans to cool down the mobo.