Paraflow antec 1200 change over

[Elusid]

looks good. i have a 1200 and i looking to water cool it i might have so something similar to what your doing.
how much space do you have in between the rads?

Somewhere around 80-100mm, I don't have a ruler with me at the moment.

That's looking really good! Great work!

6x120MM of Rad surface area for a single CPU loop.

8)

Haha that would be way overkill. I think I'm going to use my other MCR320 for my GPU loop or put both rads in a single loop with both my CPU and GPU. It really depends if I'll be able to fit three of those pumps in the bottom of my case. I hope to do a triple loop

CPU/MCR320
GPU(s)/MCR320
NB/SB/MOSFET/MCR220

I'm just still surprised I got two MCR320's, 2 HDDs, a full DVD drive, and a screen in the drive bay. I wasn't sure I was going to be able to make it all fit. I more did it though because I've read several posts saying that you couldn't fit a triple radiator, HDDs and a optical drive in and I wanted to prove them wrong [and I needed something to do]


EDIT: Oh and I was thinking of getting some of the molding used to cut and mount your own window inside your case and using it to go around the holes I cut for the fans but instead of putting plastic in it I would just put in some modders mesh. Does that sound like it would work? This stuff http://www.frozencpu.com/products/30...4c11s338#blank

EDIT2: Ok wow... so I overclocked my CPU back to what it was at (8x410 v.1.45) and I ran prime 95 just to see what the temps get to and the highest I saw them was 40C which is great considering that that is only 6C hotter then when I had twice the number of fans all running at 12V haha. I didn't realize how overkill an MCR320 was for just a CPU loop until now :P