ASUS Maximus II Formula - new P45 king?

[Grnfinger]

Grnfinger, what brand tubing is that? i can't get the tubes to not kink when connecting the CPU to the NB block.

I use Primoflex and the stuff Swiftech sells, I do believe that photo is of the 7/16th Swiftech tubing.

Tygon will not kink nor will the chepo stuff from home depot, my only gripe with home depot tubing is that it gets cloudy after a while, no problems if you use dyes but if your running clear water than its not so nice.

I've tried doing 4.4.4.12 @ 450fsb with my DDR2 1000 and it will not run stable. All I got is 480 with 5.5.5.15, CPL 10 and Ai Clock Twister on Stronger. Are there any other memory performance increases I can do? I won't post at 450 & PL 8 even with 5.5.5.15...

450FSB on the 333 strap should post with ram set to 1081MHz.
See if you can post with that setup, if so I have a few memory tweaks to get you some decent bandwidth,

630 DI FSB

http://valid.canardpc.com/show_oc.php?id=526483

VERY VERY NCE!!!
I'm beginning to think that the board runs very well when cold