Asus P6T Deluxe Discussion Thread

**okorop** · 03-05-2009, 05:22 PM

Originally Posted by 003

This is the stuff to have.

thank you for the replay; do you have the mushkin? can you post some screens of them? Thank you

**003** · 03-05-2009, 05:25 PM

I don't have that particular kit, I have G.Skill 3x2GB DDR3 1600 8-8-8-21-2T, but from what I have read, that mushkin is some of the best, good OC headroom and fantastic timings.

**okorop** · 03-05-2009, 05:26 PM

Originally Posted by 003

I don't have that particular kit, I have G.Skill 3x2GB DDR3 1600 8-8-8-21-2T, but from what I have read, that mushkin is some of the best, good OC headroom and fantastic timings.

what about your's? Beacouse I live in europe and I don't think I will find that model.....can you go over 1600mhz easly?

**003** · 03-05-2009, 05:39 PM

Originally Posted by okorop

what about your's? Beacouse I live in europe and I don't think I will find that model.....can you go over 1600mhz easly?

I really haven't tried. It runs at 1600 fine though, but only at 2T...

**cambrian** · 03-05-2009, 11:04 PM

For P6T 0403 Bios Up. 21x Multiplier doesn't work I'm afraid.
This sucks.

ftp://ftp.asus.com.tw/pub/ASUS/mb/LG...-ASUS-0403.zip

**tot31** · 03-06-2009, 12:08 AM

Originally Posted by cambrian

For P6T 0403 Bios Up. 21x Multiplier doesn't work I'm afraid.
This sucks.

ftp://ftp.asus.com.tw/pub/ASUS/mb/LG...-ASUS-0403.zip

Any change log?

**cambrian** · 03-06-2009, 12:13 AM

Originally Posted by tot31

Any change log?

change log says support new cpu (likely D0); however, it says the same thing for the p6t deluxe change log and it was able to support x21. I can't seem to dial in fixed x21 on the p6t with this bios.

**tot31** · 03-06-2009, 12:27 AM

Originally Posted by cambrian

change log says support new cpu (likely D0); however, it says the same thing for the p6t deluxe change log and it was able to support x21. I can't seem to dial in fixed x21 on the p6t with this bios.

You're right. I just updated to 0403 bios and 21x fixed multiplier doesn't work.

**angelreaper** · 03-06-2009, 01:23 AM

For P6T Deluxe V2 bios 0302 21x fixed multiplier doesn't work

ftp://ftp.asus.com.tw/pub/asus/mb/LG...XE-V2-0302.zip

**p0isonapple** · 03-06-2009, 01:37 AM

I'm currently doing a 20 LinX pass at these settings:

i7 920 Batch #3836B
Multi = 21x
BCLK = 191
vCore(Bios) = 1.42
vCore(Idle) = 1.15 (Clocks down)
vCore(Load) = 1.416 - 1.424
QPI = 1.35
IOH = Auto
ICH = Auto
DRAM = Auto

Max memory and Max problem size LinX gives me a top temp of 87c on the first core. Is this to high?

It seems my chip won't accept a 19x multi, and even then it's very unstable and crashes when i launch Prime95.

This is my first OC ever, anyone got any tips?

Cheers.

**okorop** · 03-06-2009, 02:09 AM

Originally Posted by 003

I really haven't tried. It runs at 1600 fine though, but only at 2T...

thank you.....Now I am going to try ocz platinum cas 7 1600

let's see how good they are

**tomb18** · 03-06-2009, 07:29 AM

Originally Posted by 003

I think I read somewhere that the Tuniq is not capable of properly cooling an overclocked i7 because it gets so hot that the liquid in the heatpipes evaporates and is unable to properly condense again, which leads to very ineffective cooling. The Thermalright TRUE is supposed to be the best as far as air cooling goes, maybe aside from those two gigantic coolers from Scythe. Keep in mind, this is just what I've heard. I don't have any personal experience here and can't guarantee the accuracy of the information.

This is the stuff to have.

Dump the Tuniq!
I have first hand experience with it on a qx6700. Check this out:
http://www.xtremesystems.org/forums/...00#post2089917

**okorop** · 03-06-2009, 09:01 AM

Originally Posted by tomb18

Dump the Tuniq!
I have first hand experience with it on a qx6700. Check this out:
http://www.xtremesystems.org/forums/...00#post2089917

The rams are really good probably I will try after the ocz 1600cas 7

**ewitte** · 03-06-2009, 12:56 PM

Originally Posted by tomb18

Dump the Tuniq!
I have first hand experience with it on a qx6700. Check this out:
http://www.xtremesystems.org/forums/...00#post2089917

It did great on the 9550. Load temps in the 60's idle 30's until the 295 was installed. Anyway probably going back to water.

**buddatech** · 03-06-2009, 01:09 PM

I don't understand

I was p95 stable @3.8 w/1.24v with bios 1102 update to 1303 for 21x multi, found that didn't work for me was not stable..... even p95 would fail at my oc of 3.8 w/1.24v so I reverted back to 1102 and now suddenly that is not stable with my old settings

even tried 1206 with no avail WTF. Any ideas on why or what's going on? Chip degradation already........

**ewitte** · 03-06-2009, 01:14 PM

I thought mine was degrading until I found out it was heat preventing me from using previously working settings.

**buddatech** · 03-06-2009, 01:26 PM

With the Zalman 9700 I am using p95 blend temps didn't exceed 77-78 right I'm looking over and seeing temps of 74-75

**okorop** · 03-07-2009, 04:04 AM

The 21x mult8iplaier is great.....the last 3003 bios is great

**Godmyster** · 03-07-2009, 04:40 AM

Whats the major diferences from the P6T Deluxe to the normal P6T?

Thanks

**okorop** · 03-07-2009, 05:13 AM

Originally Posted by Godmyster

Whats the major diferences from the P6T Deluxe to the normal P6T?

Thanks

asus p6t vanilla has only 8+2 Phase Power Design the deluxe 18 phase power design

**highoctane** · 03-07-2009, 10:29 AM

Originally Posted by okorop

asus p6t vanilla has only 8+2 Phase Power Design the deluxe 18 phase power design

16+2 vcore/memory

**buddatech** · 03-07-2009, 12:34 PM

Question: Should these settings be Enabled/Disabled?

Advance CPU Settings
CPU Ratio Setting: 19
C1E Suppport: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
Intel® Virtualization Tech: Enabled
CPU TM Function: Disabled
Execute Disable Bit: Enabled
Intel (R) HT Techology: Enabled
Active Processor Cores: All
A20M: Disabled
Intel (R) SpeedStep (TM) Tech: Disabled
Intel (R) C-STATE Tech: Disabled

**Astratuner** · 03-07-2009, 01:05 PM

mmz guy can someone please get on a the rails and link/tell me what bios options etc i best should disable?

Do you guys recommend that I first find the max bclck?

**Astratuner** · 03-07-2009, 01:49 PM

does those settings applie to me to ToMeGuN?

I'm new to oc'ing and I have a P6T Deluxe.

btw I was wondering since the 1303 bios you can go up to 21 with your cpu ratio.

Now intel said the 920 and 940 where locked to a bigger value but unlocked to a lower value.

Setting the cpu to 21 won't this permanently damage the cpu?

And by doing this the turbo feature doesn't work anymore right?

**okorop** · 03-07-2009, 04:40 PM

Originally Posted by Astratuner

does those settings applie to me to ToMeGuN?

I'm new to oc'ing and I have a P6T Deluxe.

btw I was wondering since the 1303 bios you can go up to 21 with your cpu ratio.

Now intel said the 920 and 940 where locked to a bigger value but unlocked to a lower value.

Setting the cpu to 21 won't this permanently damage the cpu?

And by doing this the turbo feature doesn't work anymore right?

I don't think you permanently damage the cpu and intel said that reduced the limit to the multiplaier of the rams not the cpu

Thread: Asus P6T Deluxe Discussion Thread

Thread Tools

Search Thread

Rate This Thread

Display

0403 Bios Up

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions