Very nice review, Thanks!
I installed the Supreme LT last night and the temps are the same as the KL350. idle and under load.
Its a good spare block for me now, will be switching back to the KL350, I like the clear top
Very nice review, Thanks!
I installed the Supreme LT last night and the temps are the same as the KL350. idle and under load.
Its a good spare block for me now, will be switching back to the KL350, I like the clear top
ASUS Rampage II Extreme | i7 920 cpu | Corsair Tri Channel 6 GB | GTX 580 FTW Hydro | Corsair P256 SSD| 4 TB OF HDD | Corsair HX1000 PSU
Loop #1: TFC 480 | KOOLANCE 350 BLOCK | Loop #2: TFC 360 | FTW HYDRO | Swiftech NB Block | MM Pinnacle 24 Case
HEAT
Current on going build, Mountain Mods Pinnacle 24
You can buy the acryllic top one from EK! Although I am not sure how strong the acryllic would be for mounting.....Originally Posted by Nemon
Very nice review, Thanks!
I installed the Supreme LT last night and the temps are the same as the KL350. idle and under load.
Its a good spare block for me now, will be switching back to the KL350, I like the clear top
(New build):MSI Big Bang X-power II with XSPC MB blocks, Core I7 3930k@4.6Ghz with HT on, 3x GTX 480 SLI with EK Waterblocks(for now), X-fi Titanium, Gskill quad kit 16GB 2133mhz, 2x240GB Corsair GT SSD's(raid 0), 3xWD 2TB drives, Silverstone Strider ST1500 Watt, Dell3007WFP and 2x Samsung 305T's. Water loop: EK HF CPU block, XSPC RX480 Rad, Coolgate GC480, Airplex Revolution 420 Rad, 2x DDC 3.25 18W with EK dual top, Caselabs STH10 white with customizations....
OK, you guys are going to love this one.
I'm sure it's something simple that I've overlooked, but what attaches the backing plate to the MB prior to mounting the block? My bench is horizontal with a cutout on the tray, so if nothing holds the backing plate to the MB, it falls out all the way down to the PSU
andyc
i use my own screwsi clamp it to the motherboard so remounting is a breeze..
have fun
@Hondacity
Please post some information about your flow, I would really like to compare them with mine.
my flow testing
http://www.xtremesystems.org/Forums/...d.php?t=213106
Not very well, I had a GeminiCool on a P4 years ago, it cracked, so did the replacement, and the fabricated ones thereafter. Can't say for sure if it was acrylic, but it was a clear plastic. It cracks near the fittings, even with plastic fittings. I will never touch a WB with plastic used as a structural part again !You can buy the acryllic top one from EK! Although I am not sure how strong the acryllic would be for mounting.....
But it did give me justification for the wife to buy my Mach 1 !
EVGA X58 Classified 760
W3520 @ 4410 HT 24/7
Lapped TRUE 2x 110 CFM Scythe p-p
6Gb Corsair XMS3 1600 7-7-7-20-1
XFX 5870 1Gb
PC Power and Cooling 750 Crossfire edition
CoolerMaster 590
XtremeSystems: Welcome to the Prommie Land !
Thanks a lot, I havenīt noticed yet. So my (in my opinion: bad) results seem to be right
I even wondered, if I could have get a dickey one ...
Jumped kinda late there bro, but your finally here.
The block scales very nicely with heat load as i was saying. Your gonna love the block, and it loves pressure and flow.
I got a few injectors which im gona send out to bei to get some custom drilling done on. If i like a config, i'll make sure i pass one to ya since dean gave me a few.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I think this is what impresses me most about this block. I've been running the 350 in a single loop with my 4870x2 GPU block with great results under full CPU and GPU load. I'm planning on moving to i7 soon and adding an additional GPU to the loop, but might wait for the next gen ATI cards before I do that. We'll see!Jumped kinda late there bro, but your finally here.
The block scales very nicely with heat load as i was saying. Your gonna love the block, and it loves pressure and flow.
I got a few injectors which im gona send out to bei to get some custom drilling done on. If i like a config, i'll make sure i pass one to ya since dean gave me a few.
i7 920@4.0 Ghz | Asus Rampage III Extreme | 12GB Corsair Dominator 15000
ATI Radeon 5870 x2 | Samsung LN55B650 55" 1080p + Samsung LT4665N 46" 1080p LCD TVs
Koolance CPU-350/Vid-AR587 on Koolance ERM-2K3U
Zalman HD160XT HTPC | Intel X25-M 160GB SSD + 2x VelociRaptors | Thermaltake Toughpower 1200w PSU
honda, how did u mount d-tek? i saw somewhere u used a 1366 mount from ice-hammer, right?
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
Well first he bought it dinner.....
i have to decide should i change my fuzion v1 with v2, to make smth like this
http://i155.photobucket.com/albums/s...0/DSC00472.jpg
or leave v1 and use ice-hammer round mountings
(can't find those pic)
any advice?
sorry for o/t
edit: i have found, d-tek v2 with ice hammer bracket
http://www.xtremesystems.org/forums/...53&postcount=9
Last edited by rioja; 03-05-2009 at 06:32 PM.
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
About to start doing some Ocing on this puppy. I heard you need less Vcore for more love . . .we will see. Conundrum should also have one by now (I have two of them).
This is the KL-350 done right owning on Linpack:
HT on Also.
Im gonna say this, for us xtreme people, i have yet to see a block out perform the KL-350. But you need the setup tho.
Wanna see a 920?
"Thing is, I no longer consider you a member but, rather a parasite...one that should be expunged."
Hey honda, what were the temp differences between running one pump and running two?? just out of curiosity. Thanks!
my memory has bad blocks...sorry i don't remember..but more flow should help lowering the temps for the high restriction blocks...
Posting Permissions
Reply With Quote
Bookmarks