Page 60 of 95 FirstFirst ... 10505758596061626370 ... LastLast
Results 1,476 to 1,500 of 2366

Thread: Micron D9 GMH\GKX\JKH etc club

  1. 03-04-2009, 06:33 AM #1476
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    what a pity. probably the gigabyte p45 extreme is ht best p45 board imo.
    still waiting for the board to come back...clock it to death man
    Reply With Quote Reply With Quote
  2. 03-04-2009, 06:37 AM #1477
    CryptiK
    CryptiK is offline
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Quote Originally Posted by Mafio View Post
    yes, i have measured the real voltage with multimeter and that was the same as the voltage set in the bios.

    edit: my ep45 is dead...main bios is corrupted and recovery procedure don't work...
    Well thats very nice ram in that case. The only board i have used that has a real voltage = set voltage is my M2F. Nice to see gigabyte have the same thing I'm getting fed up with boards over/under shooting set voltages.

    Pity it died, I hope your replacement goes well. Was the bios damaged in a flashing procedure or did it just die of its own accord?
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
    Reply With Quote Reply With Quote
  3. 03-04-2009, 06:40 AM #1478
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    Quote Originally Posted by simone18 View Post
    what a pity. probably the gigabyte p45 extreme is ht best p45 board imo.
    still waiting for the board to come back...clock it to death man
    i'm waiting for the express courier...
    Reply With Quote Reply With Quote
  4. 03-04-2009, 06:47 AM #1479
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    Quote Originally Posted by CryptiK View Post
    Well thats very nice ram in that case. The only board i have used that has a real voltage = set voltage is my M2F. Nice to see gigabyte have the same thing I'm getting fed up with boards over/under shooting set voltages.

    Pity it died, I hope your replacement goes well. Was the bios damaged in a flashing procedure or did it just die of its own accord?
    i bought another one, the RMA procedure is too long...
    the new mobo will arrive tomorrow

    died before overclock...
    Reply With Quote Reply With Quote
  5. 03-04-2009, 07:45 AM #1480
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    just a question: to reach high freq (doesn't mean cas latency, but obviously is cas5 or more) which of these is better?
    kit pc9200/higher with gkx or pc8500/9200 with gmh?
    Reply With Quote Reply With Quote
  6. 03-04-2009, 07:53 AM #1481
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    Quote Originally Posted by simone18 View Post
    just a question: to reach high freq (doesn't mean cas latency, but obviously is cas5 or more) which of these is better?
    kit pc9200/higher with gkx or pc8500/9200 with gmh?
    if i remember correctly the highest frequency with ddr2 is reached with teamgroup pc10400 (gkx)
    Reply With Quote Reply With Quote
  7. 03-04-2009, 08:09 AM #1482
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    dunno why, but i've no so much feeling with gkx...maybe the new ud3r could help...
    Reply With Quote Reply With Quote
  8. 03-04-2009, 08:22 AM #1483
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    Quote Originally Posted by simone18 View Post
    dunno why, but i've no so much feeling with gkx...maybe the new ud3r could help...
    but i've good feeling with all ram
    Reply With Quote Reply With Quote
  9. 03-04-2009, 08:27 AM #1484
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    it's not you, it's your board :P
    Reply With Quote Reply With Quote
  10. 03-04-2009, 08:30 AM #1485
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    Quote Originally Posted by simone18 View Post
    it's not you, it's your board :P
    your ud3r probably is better than my extreme
    Reply With Quote Reply With Quote
  11. 03-04-2009, 08:36 AM #1486
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    at high freq i think it all depends on how good are ram instead of board
    Reply With Quote Reply With Quote
  12. 03-04-2009, 11:20 AM #1487
    Ch@pS
    Ch@pS is offline
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    170


    Managed this with my Team Xtreem D9GMH, any suggestions to get them over 11k read? Its what I'm aiming for.
    Quote Originally Posted by ryba View Post
    I don't carre about PCMark - it's for gays with moustache
    A Stranger's thoughts...
    Reply With Quote Reply With Quote
  13. 03-04-2009, 11:51 AM #1488
    Mafio
    Mafio is offline
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Posts
    519
    set cas5 and increase the fsb

    edit: 1300 cas4 with what vdim???
    Last edited by Mafio; 03-04-2009 at 11:54 AM.
    Reply With Quote Reply With Quote
  14. 03-04-2009, 12:22 PM #1489
    [XC] Oj101
    [XC] Oj101 is offline
    NooB MOD
    Join Date
    Jan 2006
    Location
    South Africa
    Posts
    5,799
    3 char
    Last edited by [XC] Oj101; 03-04-2009 at 01:29 PM. Reason: Off topic removed
    Xtreme SUPERCOMPUTER
    Nov 1 - Nov 8 Join Now!


    Quote Originally Posted by Jowy Atreides View Post
    Intel is about to get athlon'd
    Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
    Reply With Quote Reply With Quote
  15. 03-04-2009, 12:34 PM #1490
    okorop
    okorop is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    185
    Quote Originally Posted by Mafio View Post
    set cas5 and increase the fsb

    edit: 1300 cas4 with what vdim???
    I agree with you...those ram promise a lot
    Reply With Quote Reply With Quote
  16. 03-04-2009, 12:57 PM #1491
    zsamz_
    zsamz_ is offline
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,247
    Quote Originally Posted by Ch@pS View Post

    Managed this with my Team Xtreem D9GMH, any suggestions to get them over 11k read? Its what I'm aiming for.
    i need high fsb for 11k
    i can do it around 508fsb you will need around 520-530 on p45

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v
    Reply With Quote Reply With Quote
  17. 03-04-2009, 01:20 PM #1492
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    any suggestions to get them over 11k read?
    which is your kit? pc10400? on which board? let me know i'm really curious.
    to reach and overcome 11k read you have to increase fsb. at least 550+
    i've done 11k with dfi p35 ut and ram 1200 cas4 with fsb 600
    Reply With Quote Reply With Quote
  18. 03-04-2009, 01:27 PM #1493
    [XC] Oj101
    [XC] Oj101 is offline
    NooB MOD
    Join Date
    Jan 2006
    Location
    South Africa
    Posts
    5,799
    PC6400C4/P5Q-Dlx AFAIK
    Xtreme SUPERCOMPUTER
    Nov 1 - Nov 8 Join Now!


    Quote Originally Posted by Jowy Atreides View Post
    Intel is about to get athlon'd
    Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
    Reply With Quote Reply With Quote
  19. 03-04-2009, 01:31 PM #1494
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    Quote Originally Posted by Oj101 View Post
    PC6400C4/P5Q-Dlx AFAIK
    are you talking about ch@ps ram?
    Reply With Quote Reply With Quote
  20. 03-04-2009, 02:16 PM #1495
    simone18
    simone18 is offline
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    125
    @chaps: 11K+ , cellshock pc8000 cas4
    Reply With Quote Reply With Quote
  21. 03-04-2009, 06:31 PM #1496
    Shiranui Gen-An
    Shiranui Gen-An is offline
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,532
    Seems I scored again, testing my new Patriot 8500 5-5-5-9 D9GKX kit and it seems to only need 2.08V or so for 600MHz C5.
    Reply With Quote Reply With Quote
  22. 03-04-2009, 10:05 PM #1497
    Ch@pS
    Ch@pS is offline
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    170
    OJ0 was Right, Team Xtreem PC2-6400C4 on a P5Q Deluxe.

    This set hates cas 5, cant even get 1300 5-5-5-5, but can do 1300 4-4-4-3 @ 2.66v.

    @chaps: 11K+ , cellshock pc8000 cas4
    On a DFI P35. Still, nice result.

    i need high fsb for 11k
    i can do it around 508fsb you will need around 520-530 on p45
    If i use higher FSB my bandwidth decreases, can only run PL9 at 550+. Will test over 500 PL8 later today and see where that takes me.
    Anyone know if theres a bandwidth record for P45 chipsets?
    Quote Originally Posted by ryba View Post
    I don't carre about PCMark - it's for gays with moustache
    A Stranger's thoughts...
    Reply With Quote Reply With Quote
  23. 03-04-2009, 10:10 PM #1498
    zsamz_
    zsamz_ is offline
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,247
    on dfi ut p35 i only need 505fsb to hit 11k

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v
    Reply With Quote Reply With Quote
  24. 03-04-2009, 10:18 PM #1499
    [XC] Oj101
    [XC] Oj101 is offline
    NooB MOD
    Join Date
    Jan 2006
    Location
    South Africa
    Posts
    5,799
    I have the exact same issue with my TXs. I've suicided 600MHz C3 but can't do 668MHz C5. These sticks are rated at C4 and that seems to be where they're happiest.
    Xtreme SUPERCOMPUTER
    Nov 1 - Nov 8 Join Now!


    Quote Originally Posted by Jowy Atreides View Post
    Intel is about to get athlon'd
    Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
    Reply With Quote Reply With Quote
  25. 03-04-2009, 10:34 PM #1500
    Ch@pS
    Ch@pS is offline
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    170
    Funny enough, my sticks used to be able to do 1333 C5 when Goddy had them, @ 2.44v though.

    Maybe its just the P5Q Deluxe i have that doesn't like my Rams.
    Quote Originally Posted by ryba View Post
    I don't carre about PCMark - it's for gays with moustache
    A Stranger's thoughts...
    Reply With Quote Reply With Quote
Page 60 of 95 FirstFirst ... 10505758596061626370 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules