Hey Joe, i think your memory is probaly causing your problem, you memory is rated for 1333, dont know if it can clock to 1600, it should, but that would be my guess, run memtest 4.0 in windows and see if your memory passes, then run prime 95, small ffts where it test mostly your cpu. Ok joe after looking again at your template, TURN ON LOAD LINE CALIBRATION , ENABLE IT. Your vtt is way to high on auto, you shouldnt run auto voltages, set vtt to 1.32-1.34, try nbv 1.50 -1.52, and enable p1 p2, cpu pll 1.52, then run the test i told you. To much vtt voltage is know to kill quads.
Reply With Quote
Bookmarks