Micron D9 GMH\GKX\JKH etc club

[fatguy1992]

Ok

I had some PC2-8500 Doms. a while back, they were awesome and then they died (I balm my P5E) and I got ones back from RMA that couldn't run stock. The great thing is that they died to

[whe3ls]

one stick is @ 1200 5 5 5 15

[fatguy1992]

Nice

What volts?

[whe3ls]

2.3 with one stick seems high. but i thing it due to this dfi 680 lt

[Ket]

Corsair QC at its best its been for years there

[whe3ls]

Corsair QC at its best its been for years there

yep. oh well now i need to find another stick of gmh

[fatguy1992]

2.3 with one stick seems high. but i thing it due to this dfi 680 lt

Thats a bit high for D9's it might be your mobo.

Corsair QC at its best its been for years there

I take it you are a fan of Corsair?

[whe3ls]

it was @ 2.31 i lowerd it to 2.28 ill see if i can go lower

[whe3ls]

k i lowered the voltage to 2.19.

[Mr Roboto]

cmx2x1024-8500c5d the pc2 1066 corsair dominators

Ok

I had some PC2-8500 Doms. a while back, they were awesome and then they died (I balm my P5E) and I got ones back from RMA that couldn't run stock. The great thing is that they died to

Same thing happened to me. My version 1.2 and 1.4 Dominators died in less than a year and they sent back absolute trash in return. With one stick DOA. They would do 1040Mhz C5 stable but not much more. I'm done with them.

Don't blame your P5E those sticks seem to die fast regardless of voltage or motherboard.

[Ket]

I take it you are a fan of Corsair?

Your being sarcastic, right?

[fatguy1992]

Same thing happened to me. My version 1.2 and 1.4 Dominators died in less than a year and they sent back absolute trash in return. With one stick DOA. They would do 1040Mhz C5 stable but not much more. I'm done with them.

Don't blame your P5E those sticks seem to die fast regardless of voltage or motherboard.

Well that would make sense why my other 2 kits have died, it should be interesting to see how long my new Corsair PC2-9136 kit will last.

Your being sarcastic, right?

Yeah I was

[Mr Roboto]

Your being sarcastic, right?

Well that would make sense why my other 2 kits have died, it should be interesting to see how long my new Corsair PC2-9136 kit will last.



Yeah I was

Those sticks seem to be hit or miss. Same with the PC2-6400 C3 on Newegg, lots of people posting reviews that the memory is either DOA or dies after a month or two.

I wonder what Corsair is sending people who's PC2-9136 sticks die or the PC2-8888 for that matter. Are they just sending back slightly higher binned 8500C5D?

[fatguy1992]

Well I got ver 1.1 when I originally brought my kit and I got sent ver 1.1 back.

[Mr Roboto]

Well I got ver 1.1 when I originally brought my kit and I got sent ver 1.1 back.

Oh nice. I wish they would have sent me 1.x back. Maybe I'll try another RMA and put a sticky note "Do not bother sending anything other than 1.x or I will RMA them right back." It's worth a shot.

[fatguy1992]

"Do not bother sending anything other than 1.x or I will RMA them right back."

Some how I don't think it will work, but

[Mr Roboto]

Some how I don't think it will work, but

I know I'm just joking. It would be nice to see Corsair find something usable though. I understand then Micron chips are at an end but at least find something that can run stock and not die after a month.

[fatguy1992]

I agree, there is no reason kits shouldn't be able to run stock.

[zsamz_]

I know I'm just joking. It would be nice to see Corsair find something usable though. I understand then Micron chips are at an end but at least find something that can run stock and not die after a month.

i personnally think that handpicked thing in corsair ram is pure bs
i have better value ram than the dominators ive seen
nothin new in those non micron dominators to die fast or be doa

[radaja]

im loving the UT-P35-T2R memory performance with my d9gmh.

[Ket]

Those numbers arent so far off P45 for that FSB, in fact, I've seen higher numbers on the P45 with very similar settings, so indeed not a bad showing from a P35

[zsamz_]

Those numbers arent so far off P45 for that FSB, in fact, I've seen higher numbers on the P45 with very similar settings, so indeed not a bad showing from a P35

the only p45 that will get those numbers is the dfi p45

[fatguy1992]

Maybe someone could tell me why my bandwidth is so low?

With these setting on my P5E I got around 92xxMB/s for Read, Write and Copy.

[zsamz_]

Maybe someone could tell me why my bandwidth is so low?

With these setting on my P5E I got around 92xxMB/s for Read, Write and Copy.

your trfc is way too high @ that speed you should be @28 not 56
and pl7 or pl6
even thwe delays are too high

[Shiranui Gen-An]

Those subtimings are awfully loose, but P45 isn't going to match the bandwidth of X38 either way.