Quote Originally Posted by technut36 View Post
hey guys i am almost done setting up the rig, the threat has gone over a 75 pages. I would really appreciate it if some one could post bios settings which would help me push i920 to around 3.8ghz, i am sure a lot have already been posted, if anyone would be kind enough to link me to a post with good stable bios settings.

I really need the help because i am a complete noob to i7 ocing.

Thank you so much guys, appreciate it.
didja miss my reply to your earlier comment?

this is my config, it's with HT off for cooler temps since I only game on this machine, you might want to leave HT on if you are doing any video encoding or other math heavy stuff

HT off
base clock = 200 x cpu multi = 19 (3800)
qpi = 36x
mem = 8x (1600)
uncore = 3200

vcore = 1.300 in bios (w LLC on)
vdimm = 1.60
qpi = 1.340
cpu pll = 1.80

all other voltages left alone... I hard set my mem timings to 9-9-9-24 1t and disabled pretty much everything in the "advanced cpu settings" area.. these settings may or may not work with your board / cpu / mem but it should help you along the way... if you intend to leave HT on, you'll likely need a little more vcore than I am using.. like 1.325 or so.. maybe higher even.. you'll have to test it out. your mem might like a little more vdimm also.. I see lots of people using 1.66 vdimm, but I didn't need to run mine that high.. ymmv
good luck!