Quote Originally Posted by Smartidiot89 View Post
Should I be satisfied with these settings?

CPU: 265 x 14 = 3710mhz
CPUv: 1.52v
NB: 265 x 8 = 2120mhz
NBv: 1.42v
HTLink: 265 x 7 = 1855mhz
HTv: 1.27v

Will be tweaking my RAM but atm its only running 1060mhz 5-5-5-18-22-2T. I did try the NB multiplier at x9 with up too 1.5v on the NB but it didn't wanna boot. So I tried 275 x 13.5 = 3712mhz on the CPU to indirectly increase my NB too 2200mhz but it got unstable with those settings.

Any tips or ideas how I could improve my 24/7 clock, I am satisfied myself with the CPU but the NB clock really disturbs me, is it worth performancewise to decrease my CPU slightly and try give the NB its x9 multiplier?
well at 1.42v on the NB you could run 2.6ghz or even 2.8ghz I run mine at 1.45v 2.8ghz

why dont you try leaving the bus speed at 200 and do this

200x18.5 3.7ghz cpu
200x 12 or 13 on the nb will give 2.4 or 2.6ghz
200x10 HTT 2ghz
set ram to 1066

high fsb doesnt improve performance really your performance comes from cpu NB and memory speed. HT and bus speed dont help except for a bit more instability where you really dont need it.

I know high bus speed looks pretty but it doesnt do anything. Ive run 270 fsb with my settings as near as I could get them and saw no performance increase from leaving it at 200.

my 24/7 settings are these

200x19 3.8ghz 1.55v
200x14nb 2.8ghz 1.45v
200x10 HTT
memory 1066

look at this screenie

http://s271.photobucket.com/albums/j...t=P1240049.jpg

but now my HTT is at 2ghz since I dont see any benefit or loss right now either or.