DFI LP UT X58-T3EH8 - First bench, bios screens etc

[eva2000]

ways to improve bclk

1. better cpu cooling, sub zero > water > air
2. more uncore, vdimm and ioh/ich voltages
3. better cpu itself
4. memory used and memory settings
5. motherboard design/bios

so runmc's eVGA X58 241 was on sub zero cooling with ioh at 1.45+ v and 1.6 uncore IIRC and only validation

Batch - 3837B512
vcore - 1.7v
vdimm - 1.80v
qpi-pll - 1.50v
cpu-pll - 1.80v
ioh-vcore - 1.45v
cpu vtt - 1.6v
ioh/ich/io - 1.55v
ich vc - 1.05
Single stage evap temps held around -40c. Room temp was 78f today

My 228bclk is super pi 32m stable and validation 231bclk all on air cooling with ioh at default 1.11v bios (dmm real same) and 1.5v uncore volts for i7 920 #2 and i7 920 #1 need 1.6v uncore (illustrates differences among cpus).

I can probably push bclk higher with right memory and voltages and sub zero cooling instead of air cooling