Gigabyte EX58-UD5/Extreme Discussion Thread

[hlonipha]

hey guys i am almost done setting up the rig, the threat has gone over a 75 pages. I would really appreciate it if some one could post bios settings which would help me push i920 to around 3.8ghz, i am sure a lot have already been posted, if anyone would be kind enough to link me to a post with good stable bios settings.

I really need the help because i am a complete noob to i7 ocing.

Thank you so much guys, appreciate it.

flash MB to F5G
My settings so far
20x (turbo on HT disable)
x36
FSB 192
RAM x8

vcore 1.39 idle 1.37 load
qpi/vtt 1.32<--could be lower still testing
ram 1.64
rest auto

[MonsterMan]

flash MB to F5G
My settings so far
20x (turbo on HT disable)
x36
FSB 192
RAM x8

vcore 1.39 idle 1.37 load
qpi/vtt 1.32<--could be lower still testing
ram 1.64
rest auto

These first bios´s, F3 & F4 seem very unstable atm!? I have same issues as others have posted. With weird restarts, or for an example: If I cold boot my computer it starts for 2 seconds, then turns off for 2sec´s, and then posts and boots? Every time i start the computer it does this. I know it should happen if you put wrong settings and the board resets the settings and behaving this way, but the settings are fine and it never requests new settings or so on?? I really hope someone here can direct me to the best UD5 bios, if not I really hope G-B soon released a better, many better bios´s. As there have only been released two official bios files since release? I mean cmon!? What is going on? And Thx btw in advance for any help!