** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[nugzo]

Yeas stable 533 for a quad is gonna be hard to do. Dont get me wrong, it can be done if you have the right hardware....and knowledge. I cant wait to give sombody elses template a try, as mine personal attempts were unsuccesful. 8gb of ram doesnt make it any easier. I'd love to have my 8gb runnin at 1066 1:1. That oughta make for some good bandwidth. While i wait for a template i'll try my luck again. Good luck!

[bobreece]

hey guys finally pick the ram am getting (http://1582.tchosts3.net/TEMPLATES/T...2DOC%2D4GK1066) but forgot to ask will the ud3p run this ram as its not in the compatiable list but niether is the ram i run now?

sorry to keep boring you all and going off topic but can anyone confirm compatability

[asap]

sorry to keep boring you all and going off topic but can anyone confirm compatability

i'm using it , run flawlessly with my UD3R, 507sb 1:1 1014 5-5-5-15 1.8v

EDIT: with 2 sets of those



asap

[fatguy1992]

My Phase Unit just arrived along with it a E8500

Heres my first quick test.



I'v never used a dual or 45nm before so i'm still learning a bit. I know the E8500 is a C0, but i got it really cheap off the builder.

[radaja]

fatguy1992,awesome! now you can get some great memory OC's

[fatguy1992]

Yeah I might have a go tonight, depends how tired I am (the tireder I am the better I overclock )

[mattlyall06]

i found elite's template:

http://www.xtremesystems.org/forums/...&postcount=799

[pierrandre]

OMG Amazing !!!

[lukeharvest]

I've heard that the UD3P only had 4 Fan Connectors, I was thinking about getting the Antec 900-2 and utilising all available fans, obviously there's more than four, so what can be done to connect them all?

[radaja]

connect the extras directly to the psu.because one of the fan headers is the cpu,so you only have three left.

[lukeharvest]

connect the extras directly to the psu.because one of the fan headers is the cpu,so you only have three left.

Will I not be able to control those fan's speed if I connect it to the PSU?

Coming to think of it, what's the maximum number of Fan Connectors you'll find on a P45 Board?

[Touche]

adpr 02,heres a post that might help you understand what ET6 shows and what to set in bios.http://www.xtremesystems.org/forums/...postcount=1157

*** Examples Below using 1.3 Vtt ***

(MCH Ref .68% AKA .68 in ET)
For example if you set 1.3 Vtt and .884 MCH Ref, ET would show .68 MCH Ref as .884 would be .68% of Vtt.

(MCH Ref .70% AKA .70 in ET)
Another example if you set 1.3 Vtt and .91 MCH Ref, ET would show .70 MCH Ref as .91 would be .70% of Vtt

(MCH Ref .72% AKA .72 in ET)
Another example if you set 1.3 Vtt and .936 MCH Ref, ET would show .72 MCH Ref as .936 would be .72% of Vtt

I don't think this is correct. Based on what I saw in screenshots here, it would actually be:

1.3Vtt + 0.884 MCHref in BIOS = 0.816 in ET
1.3Vtt + 0.91 MCHref in BIOS = 0.84 in ET
1.3Vtt + 0.936 MCHref in BIOS = 0.864 in ET

1.2 - stock Vtt
x - current Vtt
y - MCH ref shown in ET
z - MCH ref real (the one in BIOS)

z=x*y/1.2

I could be wrong, but that's consistent with the screenshots.

[radaja]

could be,i didnt check for errors i simply tried to find some post that might help.good job on double checking these values.

[WhiteFireDragon]

i'm looking into getting this mobo paired with a q9400 and gskill 2x2gb pi black. i skimmed most of the pages for answers but couldn't fine it, so here's my questions:

1) from purely an OC'ing perspective, is there advantages in picking the UD3P over the UD3R? i don't need the extra features of xfire, dual LAN port, or dolby sound included with the UD3P.
2) is the 1:1 memory divider unstable compared to the 5:6?
3) what memory are you guys using to get 1200mhz 24/7 stability?
4) i'm assuming the gskill F2-6400CL4D-4GBPI-B 2x2gb black pi series will be compatible?
5) no major fsb wall in the q9400 compared to q9550 or q9650 right? only difference is multiplier and cache right? i should be able to hit at least 480fsb with this q9400 right?

thanks!

[SPQQKY]

i'm looking into getting this mobo paired with a q9400 and gskill 2x2gb pi black. i skimmed most of the pages for answers but couldn't fine it, so here's my questions:

1) from purely an OC'ing perspective, is there advantages in picking the UD3P over the UD3R? i don't need the extra features of xfire, dual LAN port, or dolby sound included with the UD3P.
2) is the 1:1 memory divider unstable compared to the 5:6?
3) what memory are you guys using to get 1200mhz 24/7 stability?
4) i'm assuming the gskill F2-6400CL4D-4GBPI-B 2x2gb black pi series will be compatible?
5) no major fsb wall in the q9400 compared to q9550 or q9650 right? only difference is multiplier and cache right? i should be able to hit at least 480fsb with this q9400 right?

thanks!

1) I have both boards and I've found no difference in overclocking.
2) 1:1 has been stable for me, but the G.Skill Pi Black aren't phenomenal overclockers, though I do have 4 x 2GB running happily at 900 4-4-4-12
3) Can't help ya there.
4) Yes....see answer two
5) Can't help ya there either, I've only run dual cores, but 533 was no problem with them.

[radaja]

well i did some fan rearranging and after i got done i noticed my motherboard temp sensor was 10c higher than before.so i set out to find out where it was located and im pretty sure it is somewhere near the southbridge heatsink.when i sprayed some condensed air on the heatsink it self it rapidly dropped about 3c-4c.when i aimed a 4000rpm fan directly at it temps just kept dropping.

[[XC] Hicks121]

i'm looking into getting this mobo paired with a q9400 and gskill 2x2gb pi black. i skimmed most of the pages for answers but couldn't fine it, so here's my questions:

1) from purely an OC'ing perspective, is there advantages in picking the UD3P over the UD3R? i don't need the extra features of xfire, dual LAN port, or dolby sound included with the UD3P.
2) is the 1:1 memory divider unstable compared to the 5:6?
3) what memory are you guys using to get 1200mhz 24/7 stability?
4) i'm assuming the gskill F2-6400CL4D-4GBPI-B 2x2gb black pi series will be compatible?
5) no major fsb wall in the q9400 compared to q9550 or q9650 right? only difference is multiplier and cache right? i should be able to hit at least 480fsb with this q9400 right?

thanks!

Sup WFD! Im running an x3330 right now @ 472 X 8 for a few months rock steady crunchn. I got the ud3p, The only diff I know is about only 1 x16 & few othe roptions.

Get it dude, you wont be diappointed.

[EliTE22]

Yeah I might have a go tonight, depends how tired I am (the tireder I am the better I overclock )

why didnt u hook up the phase on that thing? no time?
edit: almost got the templates finished working on 4.7ghz mainly, it needs prefect settings to be stable=), i dont want to post till they all pass prime and intelburntest for hours

[WhiteFireDragon]

Sup WFD! Im running an x3330 right now @ 472 X 8 for a few months rock steady crunchn. I got the ud3p, The only diff I know is about only 1 x16 & few othe roptions.

Get it dude, you wont be diappointed.

thanks guy. i'll get UD3R + q9400 + gzkill 2x2gb pi blacks and i'll post results! hopefully i get a good chip...

[fatguy1992]

why didnt u hook up the phase on that thing? no time?
edit: almost got the templates finished working on 4.7ghz mainly, it needs prefect settings to be stable=), i dont want to post till they all pass prime and intelburntest for hours

I didn't/don't have the time till Thursday night

[SimpleTECH]

Tried running 8x500 at my vCPU that I normally run at 4GHz and it passed. So I thought, "Maybe I should go lower?"

What'd you know, I was able to go a smidgen lower.

[radaja]

i installed my new power supply and it seems i was able to lower some volts and still be stable.

[fatguy1992]

Very nice radaja

[Oztopher]

Hi guys, im thinking of getting a GA-EP45T-UD3R pretty soon. I have some questions

1. Are there any problems with the DDR3 version of the board?
2. What are the differences between revision 1.0 and 1.1?

If i have any more questions i will ask

Cheers,
Oz

[fatguy1992]

1.

From what i'v heard the DDR3 version suck.

2.

Sorry I don't know.