Does anyone here think I could get to 533fsb?
What settings should I be looking at to move the fsb up further?


Quote Originally Posted by Phunky Phish View Post
471x8.5=4Ghz




PHP Code:

MB Intelligent Tweaker(M.I.T.)     
     
Robust Graphics Booster ..................:   Auto
CPU Clock Ratio ..........................:    8
Fine CPU Clock Ratio......................:    +0.5  
CPU Frequency ............................:     4.00Ghz (471x8.5)
      
Clock Chip Control      
Standard Clock Control      
CPU Host Clock Control....................:      [Enabled]
CPU Host Frequency (Mhz) .................:    471
PCI Express Frequency (Mhz) ..............:      100
C.I.A. 2..................................:       [Disabled]

Advanced Clock Control     
CPU Clock Drive...........................:       800mV
PCI Express Clock Drive...................:     900mV
CPU Clock Skew (ps).......................:       0ps
MCH Clock Skew (ps).......................:      0ps
     
DRAM Performance Control      
Performance Enhance......................:  Turbo
MCH Frequency Latch......................:     400
System Memory Multiplier ................:     2.00D
Memory Frequency (Mhz) ..................:       950
DRAM Timing Selectable ..................:     Manual

Standard Timing Control     
CAS Latency Time.........................:     5
tRCD ....................................:     5
tRP......................................:      5
tRAS.....................................:       15
Advanced Timing Control [Press Enter]      
tRRD.....................................:     Auto
tWTR.....................................:      Auto
tWR......................................:       Auto
tRFC.....................................:     Auto
tRTP.....................................:    Auto
Command Rate (CMD) ......................:  2T   
Channel A      
Channel A Timings Settings       
Static tRead Value......................:   12

Channel B      
Channel B Timings Settings       
Static tRead Value......................:  12
      
Motherboard Voltage Control      

Load-Line Calibration.....................:      Disabled
CPU Vcore...............1.22500V..........:     1.41250v
CPU Termination.........1.200V............:       1.30v
CPU PLL.................1.500V............:     1.570v
CPU Reference...........0.760V............:     0.863v
MCH/ICH      
MCH Core................1.100V............:   1.36v
MCH Reference...........0.760V............:  0.863v
MCH/DRAM Reference......0.900V............:      0.96v
ICH I/O.................1.500V............:     1.500v
ICH Core................1.100V............:     1.100v
DRAM      
DRAM Voltage............1.800V............:  2.1v
DRAM Termination........0.900V............:      0.96v
Channel A Address Vref..0.900V............:      0.96v
Channel B Address Vref..0.900V............:      0.96v

Advanced Settings      
Limit CPUID Max. to 3.....................:       Disabled
No-Execute Memory Protect.................:     Enabled
CPU Enhanced Halt (C1E)...................:       Disabled
C2/C2E State Support......................:  Disabled
x C4/C4E State Support....................: Disabled
CPU Thermal Monitor 2(TM2) ...............: Disabled
CPU EIST Function.........................: Disabled
Virtualization Technology.................: Enabled 
Thank you all for your help.