Quote Originally Posted by EliTE22 View Post
i'm guessing ur using ET6 to overclock??? dont, just go into the bio, and change setting, and dont use ET6 and see if u still have troubles. btw: pll 1.85v is high, 1.65v pll should be more than enough for the clock u r trying to run
edit: i never used ET6, maybe try uninstalling it than using the bios to oc, also when it is turning on and off it means failed to boot, failed oc and it trys to recover with stock bios settings, did u mean your mobo boots after this with different voltage everything and way off stock???
Yeah, bro. I'd never go above 1.57v myself. I didn't select that 1.85V setting, ET6 did. Seriously, there's nothing "easy" about that program.

Well, now that I learnt to stay away from the reference voltages, I got my processor stable at 3.8ghz, primed for 2 hours. It's also stable at 3.9Ghz (primed for 15 minutes) but needs a voltage of 1.53v which is a bit high for my tastes. I'm now reading the GTL Reference voltage thread to see if I can reach any higher, with about 1.5v.

I'll think about it. 3.9 seems so tempting especially since my temperatures don't exceed 60C...

Still. What do you guys think should be the max VTT and MCH core voltage I should put through my setup? I'd rather increase those 2 from now on and leave my Vcore alone.