** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[radaja]

mattlyall06,take my advice and get the Q9650 instead.you will not be disapointed.the 9x is worth the extra money.and it just rocks with these boards.4 ghz is very easy with the 9650.ref values,you are correct.you will have to mess around with them and find your board and cpu's sweet spot.but its not that hard ,most new users are able to get there in anywhere from 2hrs to 3 days,just depends on how much you do your research.once you get your stuff feel free to ask for help,there are alot of great members here that are very helpful,wont name names cause there are so many and they know who they are.good luck

[Seanohue]

Hey guys, was wondering if I can get any input on this problem I'm having. I am trying to setup a RAID0 array and I can get into the BIOS and enable it, and get to the RAID setup utility and get my array all setup fine. When I try to load Vista (64bit business), I get a BSOD. It keeps crashing until I disable RAID again. I am using the F7 BIOS and my 2 drives I am RAIDing are in ports 2 and 3 (same model, of course), and my main system disk is in 0. Any ideas why this is happening? They show up individually in Windows fine and I can format them into single drives, but I would rather have them in RAID.

[bobreece]

have the GA45-UD3P and when i o.c my cpu and put it to around 1.376 idel and load with llc enabled i get a high pitched screaming noise coming from my board whats going on with it? and should i return the board as its only 2 days old?

one other thing i had the ddr3 version and it does not do this noise also it does not change voltage when llc is enabled where as the ddr2 board i have now does by one notch or 0.00625v???

[mreld3r]

Anyone have troubles getting their ud3p to boot from a usb-drive?
I updated my bios via usb-drive; and I have 2 bootable usb-dirves that I have been using on other computers for a while. I set it up in bios to boot off of a usb-hdd, and I have even tried the BOOT Menu off of the bios screen, it just ignores my usb drives and boots off of the C: drive?
Any help would be appreciated.

[Jor3lBR]

Anyone have troubles getting their ud3p to boot from a usb-drive?
I updated my bios via usb-drive; and I have 2 bootable usb-dirves that I have been using on other computers for a while. I set it up in bios to boot off of a usb-hdd, and I have even tried the BOOT Menu off of the bios screen, it just ignores my usb drives and boots off of the C: drive?
Any help would be appreciated.

You have to edit the boot priority: 1st) usb-hdd 2nd)hdd, have you done that?

[bobreece]

have the GA45-UD3P and when i o.c my cpu and put it to around 1.376 idel and load with llc enabled i get a high pitched screaming noise coming from my board whats going on with it? and should i return the board as its only 2 days old?

one other thing i had the ddr3 version and it does not do this noise also it does not change voltage when llc is enabled where as the ddr2 board i have now does by one notch or 0.00625v???

anyone guys opinons and advice

[Jor3lBR]

anyone guys opinons and advice

I had 4 UD3P ver. 1.0 and 1.1 + one Extreme and never observed what your describing.

May not mean anything but I would ask for replacement.

[Touche]

Hey guys, was wondering if I can get any input on this problem I'm having. I am trying to setup a RAID0 array and I can get into the BIOS and enable it, and get to the RAID setup utility and get my array all setup fine. When I try to load Vista (64bit business), I get a BSOD. It keeps crashing until I disable RAID again.

Was it in IDE before? You can't change it to AHCI/RAID if you installed Windows with IDE. There are some guides how to do it afterwards. Try to Google it.

Anyone have troubles getting their ud3p to boot from a usb-drive?
I updated my bios via usb-drive; and I have 2 bootable usb-dirves that I have been using on other computers for a while. I set it up in bios to boot off of a usb-hdd, and I have even tried the BOOT Menu off of the bios screen, it just ignores my usb drives and boots off of the C: drive?

Did you change the Hard Disk boot priority? I've tied booting from USB with my UD3R, changed the priority and all, but it still didn't work. Haven't tried another USB drive though, just one.

My stuff is on the way, I'l probably be lost when I get started, just to let everyone know in advance. Here's what I'll be using;
UD3P
E7400

I suggest you go for the e8400 if you can, as it seems to overclock a lot better.