What if you remove more pressure from the bulb? (Removing pressure reduces temperature or is it the other way?)
What if you remove more pressure from the bulb? (Removing pressure reduces temperature or is it the other way?)
If you have a cooling question or concern feel free to contact me.
i cannot tell you how happy i am to get this working
(load was provided by AMD Phenom II @ 5000mhz with 1.75 vcore all for cores
running prime) with all 4 core there was a rise in temp 3c where it settled down for the the run
made up a little charging rig for the tev bulb today so i could read the pressures correctly
i started with a static of 7bar @ ambient which was around 4c
but once down to -120 the bulb pressure dropped to 1 bar
vacuum stayed around 0 even when under load
Last edited by bazx; 02-10-2009 at 12:58 PM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
in the time i had to play tonight i managed to hit 5500mhz
and got a cpuz of 5400mhz
its very early days yet but i should be benching this weekend at last on AMD cpu
http://valid.canardpc.com/show_oc.php?id=504683
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
WooT ! Very interesting topic !
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
![Send a message via AIM to [XC] gomeler](images/misc/im_aim.gif)
congrats bazx! I'm glad you finally got it working and adjustable to boot.
thanks lads i have had a lot of enjoyment form this work
i think with a bit more work i could maybe get to -125 loaded
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
What are respective pressures of three stages?
Excellent work indeed.
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
Do You have gas recorvery stuff ? I guess with such expensive gas You haven't loose even 5 grams every refill hehe.
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
Amazing workI am very interested.
before i will check tomorrow
peter i can get most of the r14 back into the expansion tank also i have taps all over the unit so i can close sections down for maintenance
lik removing the line set
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
ron i was quite shocked how well it workedOriginally Posted by runmc
Amazing work
very stable
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Well taps is for sure good idea in "experimental" unit. How much R14 you used already ?
Why You choose TXV for a test, not CPEV ?
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
with all the experiments i am on the second kiloWell taps is for sure good idea in "experimental" unit
Why You choose TXV for a test, not CPEV ?
i used the tev as i have had only good experience with them also i had one already so there was no cost
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Baz you are leading the way for innovative cascade cooling - great job mate
omg baz, im so happy for you!
is sacha going to go for the same thing?
cheers
mentally confused and prone to wandering
CPEV start to leak with those temperatures... also a TEV is selfregulating, the best thing from it
Very good work bazx
Very nice job!!!
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
No
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
Not all of them, but it's quite likelyNo
thanks lads for the nice words
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
I'm probably happy with minesNot all of them, but it's quite likely
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
hey bazx i forgot to say that thats a quite innovative construction there
Major kudos there, bazx. This is what makes this forums Xtreme!
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
Awesome cascade bazx, those loaded temps are crazy. You're getting close to LN2 performance without having to pour constantly
bit O/T: Well I've used CPEVs more than 5 times and I have never had any leak from it ...but I have only used then in SS .
Baz if You want to try CPEV with R14 I can offer You one for good price (=low price
Regards
Peter
http://WWW.PIOTRES.COM
My productions (phase-change and containers) : Click here to see links...
Phase-change units, cascades, chillers and Ln2/DI containers builder - contact : piotres@piotres.com
Posting Permissions
Reply With Quote
is the remedy 
Bookmarks