Quote Originally Posted by andressergio View Post
hey mate

I tried this settings and tested carefully

467 x 9 MEMS 1245 5-5-5-15-5-65-8-5

CPU Skews Normal - NB Skew delay 100
RAM SKEWS all channels on 100
NB GTL +40 /DDR REF +12,5 A/B
NB DDR REF -25
MEM OC Charger = disabled
STATIC READ = disabled
PL 7 / STRONGER

vcore set on bios 1,4
pll 1,526
vtt 1,4
nb 1,45
sb 1 1,55
sb 2 1.2

CPU GTLS +10/-35/+10/-35

With this settings i passed 8hs MEMTEST no errors but i can only pas 15min BLEND...
I changed CPU GTLS but BLEND fails before or after---I also tried to run PL10, LIGHTER, seems the same, it doesn't come from memory as it passed overnight tests...

I don't know maybe is the chip i also tried with 1,42 vtt and no go also, more PLL also fails sooner, the only one is vcore at 1,4 set on bios it idles at 1,39 and loads 1,4.

Thanks
Sergio

Hi Sergio

It might be possible that you have hit a limit on your CPU/Mobo...I really can't say for sure...the only way really is to either try some more or try a different setup....

It looks like you have done quite a bit of fiddling and still have had no luck.

From your previous post it seems you have already tried to fiddle with your CPU and NB skews....what happens when you raise the vCore? Also what happens if you raise the north bridge volt? In all honesty I haven't noticed any difference with my gaming with a 4.41Ghz and a 4Ghz...I just wanted to get the most out of my CrossFireX and will probably use my 4.23Ghz profile as a nice compromise 24/7.

I did a quick test on 470x9 with lowered vCore (1.36 load 1.35 idle) on my Prime Blend stable 4.2gb profile:

25 run IBT max stress ~3gb memory -