Quote Originally Posted by kill_a_wat View Post

@ Sergio - I think you can definetly get your 470x9 just got to find those settings. I remember for me, it took a while to get 4.2 Ghz stable whilst <4.2Ghz was very quick. But my hat goes off to those with the not so good chipsets and 1.25VID chips and 4.2Ghz+ stable as I know there is quite some fiddling to do
hey mate

I tried this settings and tested carefully

467 x 9 MEMS 1245 5-5-5-15-5-65-8-5

CPU Skews Normal - NB Skew delay 100
RAM SKEWS all channels on 100
NB GTL +40 /DDR REF +12,5 A/B
NB DDR REF -25
MEM OC Charger = disabled
STATIC READ = disabled
PL 7 / STRONGER

vcore set on bios 1,4
pll 1,526
vtt 1,4
nb 1,45
sb 1 1,55
sb 2 1.2

CPU GTLS +10/-35/+10/-35

With this settings i passed 8hs MEMTEST no errors but i can only pas 15min BLEND...
I changed CPU GTLS but BLEND fails before or after---I also tried to run PL10, LIGHTER, seems the same, it doesn't come from memory as it passed overnight tests...

I don't know maybe is the chip i also tried with 1,42 vtt and no go also, more PLL also fails sooner, the only one is vcore at 1,4 set on bios it idles at 1,39 and loads 1,4.

Thanks
Sergio