Test Report: XSPC RX120

[jetroho]

This is really sad . Thanks for the heads up on the fan mount , mcoffey . I would not have thought to check the fan mountings for trueness .
I have a rx120 and a rx240 and had planned to get rid of my feser 360 and replace it with the rx360 . I've been water cooling for 6 years and have been wanting
a rad with this open fin design ,fitting size and price point forever . These rad's look to be a perfect replacement for the TC's with their fitting and shroud issues .
Plus the TC's and shrouds are getting to be a drag to find .
The rx120 fan mount is .25mm out of square and .25mm to wide on both sides of the rad . With a little extra effort you can mount a fan . No big deal .
The rx240 on the other hand is off the wall . The fan mount is square enough . Butt the width is 1.4mm to wide......1.4mm . Without slotting out the fan and case mount holes
at least 1.4mm there is no way to mount this rad...............truely sad .
Both of these rad's have the marred paint prob's too . Although not as bad as mcoffey's . The paint also smells like a hazardous waste site as well .
The second biggest drag is that this reflects terribly on XSPC . I know that XSPC designed the rads and had them built elsewhere . But someone should have made sure the paint was
dry and that the fans would fit . I've had such good luck and service from all the res tops and regular tops I've used, this is just a shame . Damn its such a drag to have what should be
a great new product in your hands only to find whomever assymbled it screwed the pooch.........damn .
Hopefully Jab-Tech can help me get this sorted out . Which is the third big drag . I hate it that Jab-Tech has to deal with this . In todays bad economy its such a bummer to have something
like this screw with your already to small bottom line .

Thanks skinnee for your testing efforts .Very nice work !
j