That is some fine fine chip you go there.Originally Posted by cryptospartan
What batch# is it ?
Mine requires 1.425v to run @ 4200Mhz with HT=ON.
Temps are nice, about 73c for the max core with LinX .0.5.5.
BTW, Linpack only use 50% of the CPU if your HT is on, make sure to use LinX 0.5.5 if you want to get 100% Load on the CPU with HT=ON.
PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
WaterCooling: Qē Project by The-Fox
CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
Posting Permissions
Reply With Quote
Bookmarks