@ simps, i dont know why you keep in sisting that these boards are not 1.stable at high fsb 2. require high voltages 3.are not good 24/7 boards 4. heats up more than other p45 boards.based on my own experience all four of these thing are untrue.there was a time in the begining where people were using auto volts(and yes the board set them very high for high fsb).but just look at pangingIII's and others OC's.most require less than 1.38v NB for 545fsb+,and ive seen as low as 1.30 vnb for 545fsb.but on average the volts required for 545fsb+ is about the same as any other p45 chipset board.all three of my maximusII board ran considerably hotter than my ud3p,but mind you my max's are all defective.
Reply With Quote
Bookmarks