ASUS Maximus II Formula - new P45 king?

[Simps]

well started to happen on 8,5

what speed you want me to test ? i can pass IBT for sure...then if a re run hours or at the other day later...BSOD....

tell me what speed for those

Thank you for your help
Sergio

Test it at the speed you are failing now... I believe you are at 8.5x483 right? Test it with 9x mult, at close to that speed... And you can test with the 8.5 mult too.

And add this to the test:
vSB1.1 - 1.20600
vSB1.5 - 1.55300

[]'s
Simps

[andressergio]

Hey Simps i tried this before trying x9 multi and passed IBT on 3000+Mb memory at 1207 PL8 Moderate again...I used the settings you gave me

I couldn't post at

CPU Skew: Delay 100
NB Skew: Delay 300

I tried all and the best is the one i show on the screen, also PLL 1,55 the rest is the same, i NEVER tried with more SB volts, Tim told me to try it also so i modified that.

[Simps]

andressergio,

I am a bit confused.
I see on your last pic, that you are using this settings:

CPU GTL's: 10 -35 10 -35
NB GTL: +30
vFSB: 1.37825
vSB1.1 - 1.20600
vSB1.5 - 1.55300

But I don't get if you are better with them or not. Is your overclock more stable with them? Are you passing stress tests that you couldn't before, with this settings? Or are they worst that your previously settings?

I look at your pic (before you change your settings to this lastest one), and you too, were passing the same IBT test... So no improvements? Here are both pics I have from you.
My conclusion is that you didn't improve... You got the same result, with different settings..

Your old settings:


Your new settings:


[]'s
Simps

[andressergio]

andressergio,

I am a bit confused.
I see on your last pic, that you are using this settings:

CPU GTL's: 10 -35 10 -35
NB GTL: +30
vFSB: 1.37825
vSB1.1 - 1.20600
vSB1.5 - 1.55300

But I don't get if you are better with them or not. Is your overclock more stable with them? Are you passing stress tests that you couldn't before, with this settings? Or are they worst that your previously settings?

I look at your pic (before you change your settings to this lastest one), and you too, were passing the same IBT test... So no improvements? Here are both pics I have from you.
My conclusion is that you didn't improve... You got the same result, with different settings..

[]'s
Simps

Sorry mate if i confused you...

Yes i passed IBT with a 2850Mb problem size custom test but an hour later gave my BSOD instant when i tried to re run it, tested today and again wont' pass...So i decided to try most of your settings for 500FSB and passed again, in a few hours will try again to see if it keeps going strong and also test using x9 multi

You uderstood now ?

************************************************** ********
my first settings where (first pic)
passed IBT yesterday and today BSOD in seconds...

4105 (483x8,5)
2x2GB Gskill 1200 PL10 Moderate vdimm 2,1

CPU Skew: Delay 200
NB Skew: Delay 100
DRAM Skews: Delay 50
CPU GTL's: +10 -35 +10 -35
NB GTL: +40
CHA / CHB Reference: Auto
NB DDR Reference: Auto
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM OC CHARGER: Enabled
PULLINS: Disabled
PCI-E Frequency: 100
vPLL: 1.55
vFSB: 1.35
vNB: 1.45775
vSB1.5: 1.5
vSB1.1: 1.1
CPU Configuration: All disabled
Load line calibration: Enabled
CPU and PCI-E Spread Spectrum: Disbaled
vcore set 1,35 idle 1,336

************************************************** ********

my new settings (second pic)
will try with this one later to see if it's still strong

4105 (483x8,5)
2x2GB Gskill 1200 PL8 Moderate vdimm 2,1

CPU Skew: Delay 200
NB Skew: Delay 100
DRAM Skews: Delay 50
CPU GTL's: +10 -35 +10 -35
NB GTL: +30
CHA / CHB Reference: +12.5
NB DDR Reference: -25
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM OC CHARGER: Enabled
PULLINS: Disabled
PCI-E Frequency: 100
vPLL: 1.55
vFSB: 1.37825
vNB: 1.45775
vSB1.5: 1.55300
vSB1.1: 1.20600
CPU Configuration: All disabled
Load line calibration: Enabled
CPU and PCI-E Spread Spectrum: Disbaled
vcore set 1,35 idle 1,336

************************************************** ********

[Simps]

Now I got it
Ok, I hope you can pass the test again in a few hours, with no errors, which will be an improvement over your old settings.
You said you got BSOD, with the old settings. This could be related to Vdimm. Since you didn't raise your Vdimm for the new test, there is a chance that the problem will happen again. But who knows, maybe it won't. Only way to know is trying it.
Waiting on your results.

[andressergio]

Now I got it
Ok, I hope you can pass the test again in a few hours, with no errors.
Waiting on your results.

Thank you mate let's hope so

[Simps]

Thank you mate let's hope so

If it fails, try the same thing, but replace 5-5-5-15 with 5-5-5-18. Might help.